Abstract:Dynamometers are used to evaluate the real-world performances of drivetrains in various loading conditions. Due to its superior power density, high bandwidth, and design flexibility, a hydrostatic power-regenerative dynamometer is an ideal candidate for hydrostatic wind turbine transmission testing. A dynamometer can emulate the wind turbine rotor dynamics and allow the investigation of the performance of a unique hydrostatic drivetrain without actually building the physical system. The proposed dynamometer is an energy-efficient system with counter-intuitive control challenges. This paper presents the dynamics, control synthesis, and experimental validation of a power-regenerative hydrostatic dynamometer. A fourth-order non-linear model with three inputs was formulated for the dynamometer. The strength of input–output couplings was identified, and two different decoupling controllers were designed and implemented. During wind turbine testing, the synchronous generator turns at a constant speed and the system model is linear. A steady-state decoupling controller was developed for independent control of the drive and transmission. The implemented decoupling controller demonstrated a negligible change in rotor speed for a 40 bar step increase in pressure, but a 20 bar pressure spike for a 4 rpm step change in rotor speed. However, during starting and stopping, the synchronous generator speed is not constant, and the system model is nonlinear. Therefore, a steady-state decoupling controller will not work. Thus, a decentralized controller with feed-forward control and gain scheduling was designed and implemented. A reference command was designed to avoid cavitation, pressure spikes, and power flow reversal during start-up. The experimental results show precise tracking in steady-state and transient operations. The decentralized controller demonstrated a negligible change in rotor speed for a 40 bar step increase in pressure but a 100 bar pressure spike for a 4 rpm step increase in rotor speed. The pressure spike was reduced by 80 bar with the implementation of feed-forward gain. The proposed electro-hydro-mechanical system requires less power and has the potential to reduce energy expenditure by 50%.

A Novel Dynamic Power Dynamometer Based on PWM Rectifier and Direct Torque Control of Induction Machine

Research on a Novel AC Variable-Frequency Dynamic Power Dynamometer

Research on an AC Variable-frequency Power Dynamometer Based on PWM Rectifier and Fuzzy Direct Torque Control

Control and implementation of alternating current variable-frequency power dynamometer

Harmonic Injection-Based Torque Ripple Reduction of PMSM with Improved DC-Link Voltage Utilization

A Novel Harmonic Current Control Method for Torque Ripple Reduction of SPMSM Considering DC-Link Voltage Limit

Research on an energy feedback power dynamometer based on improved vector control

A Novel Hybrid Control Strategy for Potential Energy Regeneration Systems of Hybrid Hydraulic Excavators.

Design, Modeling, and Pressure Control of a 300-Kw-class Hydraulic Pump/motor Loading System with Energy Regeneration

A novel harmonic elimination approach in three-phase multi-motor drives

Study on the Control of AC Dynamometer System for Hybrid Electrical Vehicle Test Bench

Dynamics and Control of an Energy-Efficient, Power-Regenerative, Hydrostatic Wind Turbine Dynamometer

A new full-speed range direct torque control strategy for induction machine

Research on Torque Ripple Minimization Strategy for Direct Torque Control of Induction Motors

A Study on the Control System of AC Dynamometer

Power Electronic Load System for Motor Drivers Testing Considering Motor Faulty Status Simulation

Design and Analysis of a Novel Dual-PM Flux Reversal Machine for Electric Vehicle Propulsion

An Effective Direct Torque Control Based on Space Vector Modulation for DTP-PMSM

A Modified Deadbeat Predictive Current Control for Improving Dynamic Performance of PMSM

Development of the Controller for Eddy Current Dynamometer Based on PWM Control

Novel deadbeat direct torque and flux control for interior permanent magnet synchronous motor