Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. Efficient transportation of minerals and solid materials through pipelines requires very complex parameters and conditions. This research investigates the correlations between different flow parameters and pipe design elements to predict bend pressure drop—a factor that indicates the possibility of erosion both in the straight pipeline sections and in the bends. Adopting a response surface methodology approach, this study identifies material conveyance conditions with best results while maintaining minimal bend pressure drop. The research shows the significant influence of slurry concentration, velocity, particle diameter, particle concentration, and pipe diameter on bend pressure drop. The speed of conveyance turns out to be the main variable that affects the bend section, whereas in the horizontal pipe portions, the pipe diameter becomes more important. This research paper gives critical consideration of the factors controlling material conveyance with the aim of reducing bend pressure drop by up to 15% for dense slurry flow inside horizontal pipelines. This study reports the outcomes, including the results of the right design values for the parameters as 1.787 m/s, 8.82, 450 μm, 466.442 mm, and 1.2 for inlet velocity of the mixture, solid volume concentration, particle size, pipe diameter, and bend ratio. The response parameter bend pressure drop was 49.7 Pa at such conditions. This study provides valuable insights into optimizing material conveyance by understanding and manipulating these key parameters to reduce bend pressure drop by up to 15% in dense slurry flow within horizontal pipelines.

Optimization Design Method of Stepped Pipeline in Dense Phase Pneumatic Conveying

The Optimization of A Low Specific Speed Pipeline Pump

The development of software on pneumatic conveying system design

Analysis of gas-solid flow characteristics in intricate pipelines

Experimental Study of Dense-Phase Pneumatic Conveying of Pulverized Coal at Elevated Pressures

Flow characteristics of pneumatic conveying of stiff shotcrete based on CFD-DEM method

Optimizing pressure drop in 90° bend horizontal pipelines for dense slurry flow: A response surface methodology approach

Development of System Design Module in Low-velocity Slug-flow Pneumatic Conveying

Numerical Simulation and Optimization of Internal Flow Field in the High Pressure Coal Conveying Pump Based on the Dynamic Mesh

Numerical Simulation on Gas-Solid Two-Phase Flow in Horizontal Pneumatic Conveying Pipe Based on DPM Model

CFD–DEM Simulation of Pneumatic Conveying in a Horizontal Channel

CFD-DEM Analysis of Hydraulic Conveying Bends: Interaction Between Pipe Orientation and Flow Regime

Design Optimization Analysis of Venturi Tube for Medium Conveying in Strengthen Grinding Process

Research on the Pneumatic Conveying Characteristics of Fly Ash in the Power Station

Research on Resistance Properties for Dense Phase Pneumatic Conveying of Pulverized Coal in Vertical Pipe at Different Pressures

Numerical study of slug characteristics for coarse particle dense phase pneumatic conveying

Fluidized dense phase pneumatic conveying: a review

Pressure Drop Characteristics of Vertical Dilute-phase Gas Conveying

A Deceleration System for Near-Diameter Spheres in Pipeline Transportation in a Pebble Bed Reactor Based on the Resistance of a Pneumatic Cushion

Conveying mechanisms of dense-phase pneumatic conveying of pulverized lignite in horizontal pipe under high pressure

Experimental Study On Pressure Drops For Dilute Phase Pneumatic Conveying In Pipe Bends Of Coal Pulverization System Of Boiler