Abstract:Numerical modeling of cascade erbium-doped and holmium-doped fluoride fiber lasers is presented. Fiber lengths were optimized for cascade lasers that had fixed or free-running wavelengths using all known spectroscopic parameters. The performance of the cascade laser was tested against dopant concentration, energy transfer process, heat generation, output coupling, and pump schemes. The results suggest that the slope efficiencies and thresholds for both transitions increase with increasing Ho3+ or Er3+ concentration with the slope efficiency stabilizing after 1 mol% rare earth doping. The heat generation in the Ho3+ -based system is lower compared to the Er3+-based system at low dopant concentration as a result of the lower rates of multiphonon relaxation. Decreasing the output coupling for the upper (~3 μm) transition decreases the threshold of the lower transition and the upper transition benefits from decreasing the output coupling for the lower transition for both cascade systems. The highest slope efficiency was achieved under counter-propagating pump conditions. Saturation of the output power occurs at comparatively higher pump power with dilute Er3+ doping compared with heavier doping. Overall, we show that the cascade Ho3+-doped fluoride laser is the best candidate for high power output because of its higher slope efficiency and lower temperature excursion of the core and no saturation of the output.

Dynamic Behavior Analysis of the 3μm and 2μm Cascade Ho3+:ZBLAN Fiber Lasers

Dynamic characteristics of 1565 nm laser pumped Tm~(3+):Ho~(3+) co-doped silica fiber laser

Modeling and Characteristics of High-Power Gain-Switched Ho3+-doped Fiber Laser At-3.9 Μm with Cascade Pumping

Dynamic Characteristics of 1 565 Nm Laser Pumped Tm3+:Ho3+ Co-Doped Silica Fiber Laser

Modeling and Optimization of Cascaded Erbium and Holmium Doped Fluoride Fiber Lasers

The Steady-state Behavior of 1565nm Laser Pumped Tm~(3+)∶Ho(3+) Co-doped Silica Fiber Laser

Modeling and Optimization of Cascaded Lasing in a Holmium Doped Fluoride Fiber Laser with Efficient Output at 3.92 Μm.

Theoretical investigation of a laser diode-pumped quasi-three-level 2 μm (Tm,Ho):YLF laser

Theoretical And Experimental Investigation Of Actively Q-Switched Tm,Ho : Ylf Lasers

Theoretical and Experimental Investigation of Optical Bistability in End-Pumped Tm, Ho:Ylf Lasers

Cascade-gain-switching Hybrid-Pumping for Generating 3.5-Um Nanosecond Pulses from Monolithic Fiber Lasers

Theoretical Study on Cascade Energy-Transfer Pumping Heavily Holmium-Doped Fluoroindate Fiber Laser At-4 Μm with High-Efficiency

Theoretical Modeling of Ho-Doped Fiber Lasers Pumped by Laser-Diodes Around 1.125 $\mu$ M

Study of laser diode end-pumped (Tm, Ho):YLF laser

Numerical Modeling of Holmium-Doped Fluoride Fiber Lasers

Energy Level Systems and Transitions of Ho:Luag Laser Resonantly Pumped by A Narrow Line-Width Tm Fiber Laser

Modeling and Optimization of Actively Q-switched 2.8 Μm Er3+-doped ZBLAN Fiber Laser

Theoretical and Experimental Study of a Single Frequency Tm,Ho:YLF Laser

Theoretical Study of Pr^3＋：zblan Upconversion Ultraviolet Fiber Laser Based on 4f5d State

Numerical analysis of hybrid mode-locking stability in a Ho-doped fiber laser

Bistable Performances of Diode-End-Pumped Quasi-Three-Level Tm,Ho:Ylf Lasers