Abstract:Poly(methyl methacrylate) (PMMA) nanofibers with different diameters were fabricated by electrospinning and their composites with polyaniline (PANI) were formed by virtue of in situ solution polymerization. The coaxial composite nanofibers so prepared were then transferred to the surface of a gold interdigitated electrode to construct a gas sensor. The structure and morphology of the PANI/PMMA composite fibers were characterized by UV–vis spectroscopy and scanning electron microscopy, which indicated that the coaxial nanofibres of PANI emeraldine salt and PMMA were successfully prepared. The electrical responses of the gas sensor based on the composite nanofibres towards triethylamine (TEA) vapors were investigated at room temperature. It was revealed that the sensor showed a sensing magnitude as high as 77 towards TEA vapor of 500ppm. In addition, the responses were linear, reversible and reproducible towards TEA vapors ranging from 20 to 500ppm. The diameters of the electrospun PMMA fibers had an effect on the sensing magnitude of the gas sensor, which is proposed to relate to the difference in the surface-to-volume ratio of the fibers. Furthermore, it was found that the concentration of doping acids only led to changes in resistance of the sensor, but could not affect its sensing characteristics. In contrast, the nature of the doping acids was determinative for the sensing magnitude of the sensor. The gas sensor with toluene sulfonic acid as the doping acid exhibited the highest sensing magnitude, which is explained by taking into account of the sensing mechanism and the interactions of doping acids with TEA vapor.

Organic Vapour Sensor from Carbon Black Filled Amorphous Polymer Composite: Effects of Processing, Carbon Fibres and Irradiation

Sensors for Organic Vapor Detection Based on Composites of Carbon Nonotubes Functionalized with Polymers

Electrical resistance response of carbon black filled amorphous polymer composite sensors to organic vapors at low vapor concentrations

Effects of Processing on Electric Response of Carbon Black Filled Poly(methyl Methacrylate) Composites Against Organic Solvent Vapors

A Novel Sensor for Organic Solvent Vapors Based on Conductive Amorphous Polymer Composites: Carbon Black/poly(butyl Methacrylate)

Electrical Response to Organic Vapor of Conductive Composites from Amorphous Polymer/Carbon Black Prepared by Polymerization Filling

Gas Sensing Materials from Carbon Black/Poly(Methyl Methacrylate) Composites

Composites of Carbon Black Functionalized with Polymers As Candidates for the Detection of Methanol Vapor

Electrical Responses and Adsorption of Conductive CB/PBMA Composites Against Organic Solvent Vapors

Carbon Nanomaterial Polymer Composite ChemFET and Chemoresistors For Vapour Sensing

Percolation and Gas Sensing Behaviours of Ternary Conductive Composites: Vapour-Grown Carbon Fibres/Carbon Black/Poly(Methyl Methacrylate)

Gas Sensing Conductive Polymer Nanocomposites Filled with Carbon Black Nanoparticles

Carbon Black/polystyrene Composites As Candidates for Gas Sensing Materials

Gas Sensitive Vapor Grown Carbon Nanofiber/polystyrene Sensors

Conducting and Gas-Sensing Properties of CB/VGCF/PBMA Conductive Composites

Effects of Temperature and Vapor Pressure on the Gas Sensing Behavior of Carbon Black Filled Polyurethane Composites

A Novel Humidity Sensor Based on Carbon Black/poly(4-vinylpyridine) Nanocomposite

Electrical Resistance Responses of PBMA/CB Conductive Composites in Organic Vapours

Studies of the vapor-induced sensitivity of hybrid composites fabricated by filling polystyrene with carbon black and carbon nanofibers

An investigation of polymer-carbon black composite gas detectors

Gas Sensing Properties of A Composite Composed of Electrospun Poly(Methyl Methacrylate) Nanofibers and in Situ Polymerized Polyaniline