Abstract:Poly(methyl methacrylate) (PMMA) nanofibers with different diameters were fabricated by electrospinning and their composites with polyaniline (PANI) were formed by virtue of in situ solution polymerization. The coaxial composite nanofibers so prepared were then transferred to the surface of a gold interdigitated electrode to construct a gas sensor. The structure and morphology of the PANI/PMMA composite fibers were characterized by UV–vis spectroscopy and scanning electron microscopy, which indicated that the coaxial nanofibres of PANI emeraldine salt and PMMA were successfully prepared. The electrical responses of the gas sensor based on the composite nanofibres towards triethylamine (TEA) vapors were investigated at room temperature. It was revealed that the sensor showed a sensing magnitude as high as 77 towards TEA vapor of 500ppm. In addition, the responses were linear, reversible and reproducible towards TEA vapors ranging from 20 to 500ppm. The diameters of the electrospun PMMA fibers had an effect on the sensing magnitude of the gas sensor, which is proposed to relate to the difference in the surface-to-volume ratio of the fibers. Furthermore, it was found that the concentration of doping acids only led to changes in resistance of the sensor, but could not affect its sensing characteristics. In contrast, the nature of the doping acids was determinative for the sensing magnitude of the sensor. The gas sensor with toluene sulfonic acid as the doping acid exhibited the highest sensing magnitude, which is explained by taking into account of the sensing mechanism and the interactions of doping acids with TEA vapor.

Gas Sensing Materials from Carbon Black/Poly(Methyl Methacrylate) Composites

Sensors for Organic Vapor Detection Based on Composites of Carbon Nonotubes Functionalized with Polymers

A Novel Sensor for Organic Solvent Vapors Based on Conductive Amorphous Polymer Composites: Carbon Black/poly(butyl Methacrylate)

Carbon Black/polystyrene Composites As Candidates for Gas Sensing Materials

Electrical resistance response of carbon black filled amorphous polymer composite sensors to organic vapors at low vapor concentrations

Conductive carbon black-filled polymethacrylate composites as gas sensing materials: Effect of glass transition temperature

Electrical Response to Organic Vapor of Conductive Composites from Amorphous Polymer/Carbon Black Prepared by Polymerization Filling

Composites of Carbon Black Functionalized with Polymers As Candidates for the Detection of Methanol Vapor

Gas Sensing Conductive Polymer Nanocomposites Filled with Carbon Black Nanoparticles

Gas Sensitivity of Carbon Black/Waterborne Polyurethane Composites

Gas Microsensors Based on Polymer-Carbon Black Composites

Analysis of Gas Sensing Behaviors of Carbon Black/waterborne Polyurethane Composites in Low Concentration Organic Vapors

Investigation on the Gas Sensitivity of Polyethylene / Carbon Black Conductive Polymer Composites

Effects of Processing on Electric Response of Carbon Black Filled Poly(methyl Methacrylate) Composites Against Organic Solvent Vapors

Conductive Polymer Composites Serving As Gas Sensors

Low carbon black filled polyurethane composite as candidate for wide spectrum gas-sensing element

Effects of Temperature and Vapor Pressure on the Gas Sensing Behavior of Carbon Black Filled Polyurethane Composites

Electrical Responses and Adsorption of Conductive CB/PBMA Composites Against Organic Solvent Vapors

Gas Sensing Properties of A Composite Composed of Electrospun Poly(Methyl Methacrylate) Nanofibers and in Situ Polymerized Polyaniline

Gas sensing conductive composites capable of size-dependent molecular discrimination and screening

CONDUCTIVE CARBON BLACK/POLYMER COMPOSITES AS GAS SENSORS