Abstract:This paper presents an analysis of the mechanical properties of different polymer optical fibers (POFs) at ultraviolet (UV) radiation conditions. Cyclic transparent optical polymer (CYTOP) and polymethyl methacrylate (PMMA) optical fibers are used in these analyses. In this case, the fiber samples are irradiated at the same wavelength, pulse time and energy conditions for different times, namely, 10 s, 1 min, 2 min and 3 min. The samples are tested in tensile tests and dynamic mechanical thermal analysis (DMTA) to infer the variation in the static and dynamic properties of such fibers as a function of the UV radiation condition. Furthermore, reference samples of each fiber (without UV radiation) are tested for comparison purposes. The results show a lower UV resistance of PMMA fibers, i.e., higher variation in the material features in static conditions (Young's modulus variation of 0.65 GPa). In addition, CYTOP fiber (material known for its high UV resistance related to its optical properties) also presented Young's modulus variation of around 0.38 GPa. The reason for this reduction in the moduli is related to possible localized annealing due to thermal effects when the fibers are subjected to UV radiation. The dynamic results also indicated a higher variation in the PMMA fibers storage modulus, which is around 30% higher than the variations in the CYTOP fibers when different radiation conditions are analyzed. However, CYTOP fibers show a smaller operational temperature range and higher variation in the storage modulus as a function of the temperature when compared with PMMA fibers. In contrast, PMMA fibers show higher variations in their material properties when subjected to oscillatory loads at different frequency conditions. Thus, the results obtained in this work can be used as guidelines for the influence of UV radiation in POFs not only for the material choice, but also on the limitations of UV radiation in the fabrication of the grating as well as in sensor applications at UV radiation conditions.

Study on Surface Fluorinating for Reducing Attenuation of Polymethyl Methacrylate Polymer Optic Fiber

Synthesis and properties of copolymers of methyl methacrylate with 2,3,4,5,6‐pentafluoro and 4‐trifluoromethyl 2,3,5,6‐tetrafluoro styrenes: An intrachain interaction between methyl ester and fluoro aromatic moieties

Flame retardancy of a novel high transparent poly(methyl methacrylate) modified with phosphorus-containing compound

A Supercritical Removal Method: The Rapid Elimination Of Impurities In Polymethyl-Methacrylate At Near Room Temperature And A Mechanism Investigation Of Insulating Property Improvements

A novel copolymer of methyl methacrylate with N-pentafluorophenyl maleimide: High glass transition temperature and highly transparent polymer

An experimental study of intensity‐phase characterization of femtosecond laser pulses propagated through a polymethyl methacrylate

Influence of direct fluorination treatment on surface and optical properties of colorless and transparent polyimides

In Situ Copolymerized Toughened Polymethyl Methacrylate (PMMA) with Highly Transparency for Support Film of Polarizers

Effects of 365 nm UV lamp irradiation of polymethylmethacrylate (PMMA)

Impact of surface-polish on the angular and wavelength dependence of fiber focal ratio degradation

A Study of Variable Fiber-Polymer Optical Attenuator for Simple Frame

Controlled surface modification of poly(methyl methacrylate) film by fluoroalkyl end-capped vinyltrimethoxysilane oligomeric silica/hexagonal boron nitride nanocomposites

Polymer Micro or Nanofibers for Optical Device Applications

Synthesis and Solution Properties of Fluorocarbon-Modified Poly(N,N-Dimethylacrylamide)

Preparation of semifluorinated poly(meth)acrylates by improved photo-controlled radical polymerization without the use of a fluorinated RAFT agent: facilitating surface fabrication with fluorinated materials

Influence of UV Radiation on Mechanical Properties of Polymer Optical Fibers

A Simple Photochemical Method for Surface Fluorination Using Perfluoroketones

Solvent effect on the film formation and the stability of the surface properties of poly(methyl methacrylate) end-capped with fluorinated units.

Thermal and Optical Properties, and Aggregated Structure of Poly(substituted methylene)s Produced by Radical Polymerization of Fumarates Containing Fluorine-Substituted Alkyl Ester Groups

Study on the photosensitivity of birefringent grating in copolymer optical fiber with high concentration

Improve the surface structural and optical properties of PM-355 polymer by alpha particles