Abstract:Distributed fiber-optic sensing (DFOS) technologies have been used for decades to detect damage in infrastructure. One recent DFOS technology, Optical Frequency Domain Reflectometry (OFDR), has attracted attention from the structural engineering community because its high spatial resolution and refined accuracy could enable new monitoring possibilities and new insight regarding the behavior of reinforced concrete (RC) structures. The current research project explores the ability and potential of OFDR to measure distributed strain in RC structures through laboratory tests on an innovative beam–column connection, in which a partial slot joint was introduced between the beam and the column to control damage. In the test specimen, fiber-optic cables were embedded in both the steel reinforcement and concrete. The specimen was tested under quasi-static cyclic loading with increasing displacement demand at the structural laboratory of the Pacific Earthquake Engineering Research (PEER) Center of UC Berkeley. Different types of fiber-optic cables were embedded both in the concrete and the rebar. The influence of the cable coating and cable position are discussed. The DFOS results are compared with traditional measurements (DIC and LVDT). The high resolution of DFOS at small deformations provides new insights regarding the mechanical behavior of the slotted RC beam–column connection, including direct measurement of beam curvature, rebar deformation, and slot opening and closing. A major contribution of this work is the quantification of the performance and limitations of the DFOS system under large cyclic strains. Performance is quantified in terms of non-valid points (which occur in large strains when the DFOS analyzer does not return a strain value), maximum strain that can be reliably measured, crack width that causes cable rupture, and the effect of the cable coating on the measurements. Structural damage indices are also proposed based on the DFOS results. These damage indices correlate reasonably well with the maximum sustained drift, indicating the potential of using DFOS for RC structural damage assessment. The experimental data set is made publicly available.

Seismic Damage Identification Using Multi-Line Distributed Fiber Optic Sensor System

Seismic Damage Identification for Steel Structures Using Distributed Fiber Optics.

Towards an Automated Crack Monitoring using Distributed Fiber Optic Sensors

Crack monitoring on concrete structures with distributed fiber optic sensors—Toward automated data evaluation and assessment

Seismic Damage Monitoirng for Steel Structure Using Smart Distributed Fiber Optics

The Multi-line Distributed Fiber Optic Crack Detection System and Its Application

On using the DFOS for damage identification in civil engineering structures

Experimental Research on Corrosion-Induced Cracking Monitoring Based on Optical Fiber Sensor

Experimental Research on Monitoring Concrete Expansion and Cracking Induced by Corrosion based on Distributed Optical Fiber Sensor

A Novel Method of Embedding Distributed Optical Fiber Sensors for Structural Health Monitoring

Embedded Distributed Optical Fiber Sensors in Reinforced Concrete Structures—A Case Study

An Optical Fiber Sensor Method for Simultaneously Monitoring Corrosion and Structural Strain Induced by Loading

Real-Time Structural Health Monitoring Using a Novel Fiber-Optic Accelerometer System

Structural Health Monitoring Using A Novel Fiber Optic Fabry-Perot Sensor System

Fiber optic sensing of concrete cracking and rebar deformation using several types of cable

Distributed Fiber-Optic Strain Sensing of an Innovative Reinforced Concrete Beam–Column Connection

Quantitative strain measurement and crack detection in RC structures using a truly distributed fiber optic sensing system

Developing an Intelligent Fiber-Optic System for Monitoring Reinforced Concrete Foundation Structure Damage

Cracks monitoring in reinforced concrete structure with optical fibers patch

Application of Distributed Fibre Optical Sensing in Reinforced Concrete Elements Subjected to Monotonic and Cyclic Loading

Improving Distributed Fiber Optic Sensor Measures by Digital Image Correlation: Two-Stage Structural Health Monitoring