Abstract:In the aircraft industry, helical milling is utilized to generate holes in difficult-to-machine materials by means of operating a cutting tool on a helical path into the workpiece. This paper proposes a new helical milling device as an end-effector of industrial robots. The end-effector employs a direct drive rotary motor with dual-eccentric structure to achieve high position accuracy of spindle eccentricity (or radial offset), which indicates the distance between the spindle axis and the hole axis in the radial direction. In order to eliminate the adverse effects of spindle eccentric rotation, time-varying cutting force, and other uncertain disturbances during the machining process, a closed-loop servo control system is designed based on the adaptive robust control (ARC) methodology. Comparative experiments and machining experiments have been conducted to verify the effectiveness of the proposed helical milling end-effector. Compared with the PID and deterministic robust control controllers, the ARC controller guarantees higher accuracy of the spindle eccentricity in the presence of parametric uncertainties and uncertain disturbances. Average errors and maximum errors of the spindle eccentricity stay below 0.5 and 1.6 μm when machining holes with the eccentricity ranging from 0.5 to 4 mm, respectively. Surface roughness Ra and roundness of the machined holes in Ti-alloy and carbon fiber reinforced plastic materials are all below 3.2 and 7 μm, respectively. The results show that the proposed helical milling end-effector is suitable for hole-machining tasks in aircraft assembly applications.

A New Mechanism For Boring Of Non-Circular Hole And Its Control Method

Suppression of Chatter for Precision Hole Boring Based on Variable Structural Stiffness

Research on Control Method for Machining Non-Cylinder Pin Hole of Piston

Real-time Measuring Method to Measure the Micro-Displacement of a Rotating Cutter in Precise Piston Noncylinder Pinhole Boring

Precision Servo Control of GMA Based on Compounding Feedforward Compensation

Research on Multi-Parametric Coupling Design Method of Deformable Boring Bar in Embedded Giant Magnetostrictive Actuator

Linearity Hysteresis Model of Giant Magnetostrictive Components for Non-Cylindrical Hole Precision Machining

Magnetorheological fluid-controlled boring bar for chatter suppression

Non-cylinder Holes Precision Machining by Giant Magnetostrictive Components with Sliding Mode Control

A Structural Analysis and Optimum of a Deformable Unit for Revolving Magnetic Actuation Mechanism

Machining principle for non-cylinder pin hole of piston based on giant magnetostrictive material

Chatter Mechanism and Stability Analysis of Robotic Boring

Parameter Optimization of Time-Varying Stiffness Method for Chatter Suppression Based on Magnetorheological Fluid-Controlled Boring Bar

A Novel Helical Milling End-Effector and Its Application

Study on A Magnetic Actuation Mechanism and Its Performance Simulations

An Improved Two-Point Real-Time Measuring Method for Radial Micro-Displacement Measurement on High-Speed Smart Boring Bar

Vibration Analysis and Suppression in Robotic Boring Process

Measurement and Analysis of Dynamic Characteristics of Magnetorheological Intelligent Boring Bar

Finite Element Simulation and Experimental Analysis of Robotic Boring Based on an Approach of Equivalent Stiffness

Research on the Boring Chatter Suppression Based on MR Fluid

Dynamic Cutting Force Modeling and Experimental Study of Industrial Robotic Boring