Abstract:As the precision of model updating based on modal parameters usually depends on the accuracy of mode shapes, which are frequently affected by measurement noise and spatial incompleteness, there has been paid much attention to the research on this topic arising from the practical marine engineering. To overcome this challenging issue, a novel nonmode-shape-based model updating method has been proposed in this paper for reliable and effective identification of complex engineering structures. Based on the measured signals from accelerometers, the acceleration components corresponding to the first several natural frequencies of the structure have been extracted. Following that, a series of linear equations containing the updating coefficients have been established with the fuse of modal information from the baseline model to determinate the change in structural parameters. The major contributions of this research include: (1) The underlying principle of the proposed method is based on the time-dependent acceleration components instead of mode shapes in traditional methods to construct more equations, which represents more structural parameters such as the mass, stiffness and damping properties under considerations and (2) The isolation of noise and acceleration components has been achieved by the developed complex exponential decomposition technique, leading to the proposed method with the capability of denoising suitable for marine engineering applications. Moreover, the analytical signal can also be obtained to construct equations for the calculation of structural damping property using Hilbert transform. To verify the effectiveness of the proposed method, a numerical example of the cantilever beam has been examined under the consideration of spatial completeness, spatial incompleteness and measurement noise. Results have shown that the updating coefficients of the model can be accurately calculated using more equations constructed purely by the first-order acceleration components in the proposed method. Meanwhile, the absolute maximum error of the natural frequency has been reduced from 4.711% to 0.785% for the acceleration containing 5% measurement noise. Next, a jacket platform model has been established to verify the performance of the proposed method applicable to complex engineering structures. It has been noted that the maximum error (0.957%) of the first three natural frequencies of the updated model has been evaluated. Finally, a set of experiments of cantilever beams have been carried out. These tests have been designed according to the number and location of the cracks. The maximum error (1.559%) of the natural frequencies has been observed as compared with the real results, which have further demonstrated the effectiveness of the proposed method.

Development of a Computer Aided Model Updating System (CAMUS)

Structural modal identification and MCMC-based model updating by a Bayesian approach

Bayesian model updating of a 20-story office building utilizing operational modal analysis results

Bayesian Model Updating of a 250 M Super-Tall Building Utilizing an Enhanced Markov Chain Monte Carlo Simulation Algorithm

Dynamical finite element model updating methods by adding known masses

Hierarchical Model Updating Strategy of Complex Assembled Structures with Uncorrelated Dynamic Modes

Model Updating of Complex Structures Using the Combination of Component Mode Synthesis and Kriging Predictor

An updating method suitable for finite element model updating of large-scakled structures

Finite Element Model Updating of Complex Structure Using Component Mode Synthesis Technique

Scheme of Model Updating and Implement for Structural Dynamics Analysis

A DIRECT MODEL UPDATING METHOD USING ADDED KNOWN STIFFNESS

Markov Chain Monte Carlo-based Bayesian Model Updating of a Sailboat-Shaped Building Using a Parallel Technique

An Improved Model Updating Method by Adding Given Mass

Efficient model updating and health monitoring methodology using incomplete modal data without mode matching

Fuzzy Cross-Model Cross-Mode Method And Its Application To Update The Finite Element Model Of Structures

Model Updating and Damage Detection Using Cross Model Cross Mode Method for 3D Frame Structures

An Enhanced Substructure-Based Response Sensitivity Method for Finite Element Model Updating of Large-Scale Structures

Bayesian model updating of super high‐rise building for construction simulation

Structural Dynamic Model Updating with Automatic Mode Identification Using Particle Swarm Optimization

A Nonmode-Shape-based Model Updating Method for Offshore Structures Using Extracted Components from Measured Accelerations

Update the finite element model of Canton Tower based on direct matrix updating with incomplete modal data