Abstract:Abstract : This paper reports the status and recent progress in development of a 100kW variable bi-directional DC-DC converter with input voltage ranging from 200 to 300Vdc, output voltage ranging from 300 to 600Vdc, a total efficiency > 95%, a power density > 4kW/liter, and a specific power density > 4kW/kg with a high coolant temperature of > 90 deg C. Multiple approaches are being studied to reduce power losses, increase operation frequency, decrease converter weight and size, including (i) a novel yet simple approach developed to achieve zero-voltage soft-switching with synchronous mode operation for high efficiency without adding any extra switch or other major components, which has led to reduce the Si IGBT switching loss by near 50% and making it possible for the converter to operate at 25KHz, (ii) an interleaving 3-phase design and implementation leading to the elimination of the ripple current going into the sensitive voltage source, (iii) designing and building compact nano-inductor with discontinuous conduction mode operation and compact bus capacitor size with ripple cancellation, and (iv) packaging and implementation of SiC Schottky diode-Si IGBT power modules with minimized thermal resistance. Experimental results of the bidirectional DC-DC converter achieving a total efficiency of 97% operating at 100kW with a coolant temperature of 90 deg C and a power density better than 4 kW/liter will be presented.

Development of a 1.5 MVA Universal Converter Module for Traction Drive and Utility Applications

Modular Tri-Port High-Power Converter for SRM Based Plug-in Hybrid Electrical Trucks

Structural Design of A Five-Level Hybrid Active Npc Converter for High Power Density Motor Drives

A Five-level AC/DC Converter for MV Solid-State Transformer

Design and experiment of a zero-voltage-switching module for bidirectional DC solid-state transformer

Family of Enhanced ZCS Single-Stage Single-Phase Isolated AC–DC Converter for High-Power High-Voltage DC Supply

Engineering design for structure and bus bar of 1.2MVA hybrid clamped five-level converter module

Design of H-bridge Based Converter Module Used in Cascaded DSTATCOM

Three-phase Voltage Source Converters Based on Series-Connected Power devices for Medium Voltage Variable Speed Drives.

Engineering Design for Structure and Bus Bar of 1.2MV·A Hybrid Clamped Five-Level Converter Module

Bidirectional Modular Multilevel Resonant DC Converter for MVDC and LVDC Application

A Modular Multilevel Converter with Boosting, Self-Balancing, and Scaling Capabilities for High- Voltage Transformerless PV Applications

Development of a High Power Density Auxiliary Converter Based on 1700V 225A SiC MOSFET for Trams

A New Modular Multilevel AC/AC Converter Using HF Transformer

Design and Implementation of a High-Power DC/DC Converter for HVDC Interconnections with Wide DC Voltage Range and Fault-Blocking Capability

Hardware Design and Demonstration of a 100kw, 99% Efficiency Dual Active Half Bridge Converter Based on 1700V SiC Power MOSFET

Development of a compact 750KVA three-phase NPC three-level universal inverter module with specifically designed busbar

A Compact Modular Multilevel DC–DC Converter for High Step-Ratio MV and HV Use

Development of Compact Variable-Voltage, Bi-Directional 100KW DC-DC Converter

A Transformerless High-Voltage DC–DC Converter for DC Grid Interconnection