Abstract:A bidirectional deployable parabolic cylindrical reflector for an L-band synthetic aperture radar is presented in this study, in which a self-deployed antenna with low weight was designed. The antenna consists of four curved surfaces formed from thin sheets of composite materials connected by hinges along the edges, and the reflective surface is provided by the front surface. The edge profiles of connecting lines were obtained through geometric analysis. A scaled model, including design and manufacture, was demonstrated to validate the process from the folded state to the fully deployed state. The non-contact synchronous vision measuring method was used to test the basic frequency of the scaled model, and the test results gave the verification of the analyses. Compared with the existing unidirectional deployable antenna, this new type of bidirectional deployable antenna can be applied to larger-size antennas and has better performance because the glass-woven tape connections were substituted with more reliable hinges. Static, modal, harmonic response, and transient response analyses of the full-sized reflector structure were modeled with the commercial finite element (FE) package ABAQUS. The modeling techniques were developed to predict the structural dynamic behavior of the reflector and the results showed that the first natural frequency was 0.865 Hz, and the reflector structure had good stiffness in three directions. This proposed structure has very high stiffness-to-mass ratio because of its hollow solid construction. A preliminary simulation of radiation properties of the parabolic cylindrical antenna, fed by an off-set linear feed horn array, was conducted to obtain the radiation pattern of the feed and the reflector.

Accurate algorithm for analysis of surface errors in reflector antennas and calculation of gain loss

Error Computation Method of Deployable Truss Antenna

Structure design and mechanical measurement of inflatable antenna

Design and Analysis of Bidirectional Deployable Parabolic Cylindrical Antenna

Reflector Surface Precision Experiment of Deployable Truss Antenna

Theoretical Analysis of Surface Error for Deployable Truss Antenna

Analysis on Solar Radiation Heat Flow on Surface of Antenna Reflector on Orbit

A shape design method of large space deployable paraboloid antenna

A surface deformation measurement algorithm for reflector antennas based on complex geometrical optics

Surface Deformation Recovery Algorithm for Reflector Antennas Based on Geometric Optics

Interval-Based Tolerance Analysis Method for Petal Reflector Antenna with Random Surface and Deployment Errors

Tolerance Modeling and Analysis Considering Form Defects for Spaceborne Array Antenna

Surface detection method for large active reflector antennas based on even-odd phase expansion

Efficient Analysis of Wireless Communication Antennas Using an Accurate [Z] Matrix Interpolation Technique

Reflector Surface Alignment Based on Antenna Gain Measurements under Perturbations

Dynamic Analysis of Reflector Structure for a Solid-Surface Deployable Antenna

Analysis of Reflectarray Antenna Elements under Arbitrary Incident Angles and Polarizations Using Generalized Boundary Conditions

Solving Surface Deformation of Radio Telescope Antenna by Artificial Neural Network

A technique based on the quasi-actual feed for suppressing sidelobe levels of reflector antenna

Optimisation of Phase Factor in Phase Retrieval for Reflector Antennas with Active Surface

Study on the Phase Factor of Phase Retrieval Algorithm for Surface Diagnosis of Large Reflector Antennas