Abstract:power consumption of the clock tree dominates over 40% of the total power in modern high performance VLSI designs, measures must be taken to keep it under control. One of the most effective methods is based on clock gating to shut off the clock when the modules are idle. However, previous works on gated clock tree power minimization are mostly focused on clock routing and the improvements are often limited by the given registers placement. The purpose of this work is to navigate the registers during placement to further reduce the clock tree power based on clock gating. Our method performs activity-aware register clustering that reduces the clock tree power not only by clumping the registers into a smaller area, but also by pulling the registers with the similar activity patterns closely to shut off the clock more time for the resultant subtrees. In order to reduce the impact of signal nets wirelength and power due to register clustering, we apply the timing and activity based net weighting in [14], which reduces the nets switching power by assigning a combination of activity and timing weights to the nets with higher switching rates or more critical timing. To tradeoff the power dissipated by the clock tree and the control signal, we extend the idea of local ungating in [6] and propose an algorithm of gate control signal optimization, which still sets the gate enable signal high if a register is active for a number of consecutive clock cycles. Experimental results on a set of MCNC benchmarks show that our approach is able to reduce the power and total wirelength of clock tree greatly with minimal overheads.

FSM Decomposition for Power Gating Design Automation in Sequential Circuits

LECTOR Based Clock Gating for Low Power Multi-Stage Flip Flop Applications

Fine-grained Power Gating for Leakage and Short-circuit Power Reduction by using Asynchronous-logic.

Timing-aware Clock Gating of Pulsed-Latch Circuits for Low Power Design.

New Method for Low Power Sequential Circuit Design Based on Clock Gating

Data-Dependent Clock Gating approach for Low Power Sequential System

Integrating Operation Scheduling and Binding for Functional Unit Power-Gating in High-Level Synthesis

Power-gating-aware Scheduling with Effective Hardware Resources Optimization.

Low Power Gated Clock Tree Driven Placement

Improve Clock Gating Through Power-Optimal Enable Function Selection.

Power-Aware Gated Clock Routing with Merging Cost Backward Annotation Using Simulated Annealing Method

Design of Flip-Flops with Clock-Gating and Pull-Up Control Scheme for Power-Constrained and Speed-Insensitive Applications.

Analysis and Suppression for Gate Oscillation Caused by Body Diodes on Paralleled SiC MOSFETs Application

Power-efficient Dual-Edge Implicit Pulse-Triggered Flip-Flop with an Embedded Clock-Gating Scheme.

Techniques Of Power-Gating To Kill Sub-Threshold Leakage

An Effective Gated Clock Tree Design Based on Activity and Register Aware Placement

A 0.7-V Clock-gating Cell with Power Gating Technology and 1.56-pA Sleep Power

A Novel Performance Driven Power Gating Based on Distributed Sleep Transistor Network

Power Gating Structure for Reversible Programmable Logic Array

Activity And Register Placement Aware Gated Clock Network Design

Design of A Low-Power Pulse-Triggered Flip-Flop with Conditional Clock Technique