Abstract:With the continuous improvement in oilfield development and the application of tertiary oil recovery technology, the water content of oilfield-produced fluids has gradually increased, and a large number of oilfield sewage with complex components has also been produced after oil-water separation, and effective treatment is urgently needed. ASP flooding sewage contains alkali, various surfactants, polymers, microemulsion oil droplets, and solid impurities, which are difficult to be effectively treated by traditional water treatment agents and methods. In this study, aminopropyl triethoxysilane (APTES) was used to modify the nano-Fe3O4 coated with tetraethyl silicate (TEOS). The product was used as the ferromagnetic nano-core for the iterative reaction of Michael addition and ester amidation to synthesize a magnetic hyperbranched polyamide amine, and its performance in the treatment of ASP flooding wastewater was evaluated experimentally. For the preparation of APTES-modified Fe3O4@SiO2 (FOSN) product, TEOS was coated over Fe3O4 in an ethanol aqueous solution environment and then APTES was added dropwise. The first-generation branched product (1-FSMN) was obtained by the reaction of FOSN and methyl acrylate graft product (FOSN-M) with ethylenediamine, and the highest yield was 93.7%. The highest yield of the second-generation branched product (2-FSMN) was 91.6%. In this study, a composite flooding wastewater sample from a block in the Bohai oilfield was taken. The suspended solids content was 143 mg/L, the oil content was 921.09 mg/L, the turbidity was 135 NTU, and the zeta potential was -47 mV. The third-generation hyperbranched polymer (3-FSMN) and its quaternary ammonium salt (3-FSMN-Q) performed best in the appropriate dosage range, with the highest oil removal rate of 97%, suspended solid removal rate of 90.3%, turbidity reduction rate of 86.6% and zeta potential reduction rate of 88%. For 3-FSMN and its quaternary ammonium salt, the gravity/magnetic PAC compound treatment experiment was carried out. In the settlement time of only 5 min, 3-FSMN/PAC and 3-FSMN-Q/PAC can achieve the maximum oil removal rate of 87.1% and suspended solids removal rate of 87.3% for polymer containing wastewater from ASP flooding, and 86.3 and 86.0% for 120 mg/L. Its treatment capacity was much better than that of common treatment agent combination (CPAM/PAC).

Treatment of ASP produced water with hydrophilic fibre ball filtration

Asp flooding produced fluid characteristic and treatment process

Treatment of Offshore Oily Produced Water: Research and Application of a Novel Fibrous Coalescence Technique

Efficiency and microbial community characteristics of strong alkali ASP flooding produced water treated by composite biofilm system

PSU-g-SBMA Hollow Fiber Membrane for Treatment of Oily Wastewater.

Produced-water Treatment: Application and Research of Combined Fiber Coalescence Technique in Offshore Oilfield

Recyclable polyether-polyquaternium grafted SiO2 microsphere for efficient treatment of ASP flooding-produced water: oil adsorption characteristics and mechanism

Treatment of Heavy Oil Wastewater with Two Stages DAF Combined with ASP and I-BF Process - A Field Pilot Test

Improvement of Oil-Prllf Capability of Fier Ball Filtration Meduum by Oil Field Wastewater

Application of Oil Remover in the Treatment of Oily Sewage of Alkali-Surfactant-Polymer Flooding

Experimental study on ASP flooding produced water

Effects of alkaline/surfactant/polymer on stability of oil droplets in produced water from ASP flooding

Long-Lasting Filtration of Oily Water by Anti-Fouling Underwater Oleophobic Sand Particles

Feasibility and Technology of Biological Treatment for Extra-Low Permeability Oilfield Produced Water

Magnetic Hyperbranched Molecular Materials for Treatment of Oily Sewage Containing Polymer in Oilfield Compound Flooding

Treatment of High-salinity Oilfield Produced Water by Hydrolysis Acidification/Aerobic Process

Characterization and demulsification of produced liquid from weak base ASP flooding

Polymer-flooding Produced Water Treatment Using an Electro-Hybrid Ozonation-Coagulation System with Novel Cathode Membranes Targeting Alternating Filtration and in Situ Self-Cleaning

Study on optimization of blend ratio of physical sedimentation from ASP-flooding produced water and sedimentation effect

Destabilization of Oil Droplets in Produced Water from ASP Flooding

Performance Characteristics of a Hybrid Membrane Pilot-Scale Plant for Oilfield-Produced Wastewater