Abstract:Abstract Quantitative ultrasound (QUS) has been widely used in non-destructive evaluation of bone health in research and clinical practice. To make a more accurate bone evaluation, the transmission characteristics of ultrasound in the bone need to be understood in detail. In the two-dimensional finite element model, cancellous bone is usually simulated by a non-porous structure solid or by approximating bone trabeculae as ellipses, which is different from real bone. However, although the error of the model constructed by bone CT images is small, it needs to be based on real bone samples, and the samples are limited. Therefore, a modeling method of cancellous bone based on four-parameter random growth method was proposed in this paper, and on this basis, numerical simulation of ultrasonic transmission was carried out. Firstly, based on the four-parameter random growth method, the aggregation algorithm is used to concentrate discrete pixels and smooth the edge of pores. Meanwhile, the built-in algorithm ensures the same porosity before and after processing to reduce the discrete pore structure. Secondly, based on COMSOL to establish the simulation model of ultrasonic propagation in cancellous bone, we analyzed the change of acoustic field distribution, discussed the correlation between the porosity of cancellous bone and backscattering coefficient (BSC) based on the ultrasonic backscattering method, and compared the experimental results of CT scan images of bone samples. The experimental results show that the cancellous bone modeling method in this paper has the same conclusion as the method based on CT images, which verifies the feasibility of this method. This method can generate a geometric model of the cancellous bone microstructure with specified porosity and different bone trabecular distribution, which is similar to the real bone structure, and can be directly imported into the finite element software to facilitate the study of bone microstructure related problems. It provides a more convenient method to study the mechanism of ultrasonic propagation in cancellous bone and has important significance in solving the inverse problem of recovering effective bone parameters from the received ultrasonic signals.

Research on the effect of numerical aperture on probing depth of OCT system with new Monte Carlo simulation model

Modeling the Depth-Sectioning Effect in Reflection-Mode Dynamic Speckle-Field Interferometric Microscopy.

A Numerical Simulation Method for Ultrasonic Transmission in Cancellous Bone Based on a Four-Parameter Random Growth Method

Endoscopic Optical Coherence Tomography Angiography Using Inverse SNR-amplitude Decorrelation Features and Electrothermal Micro-Electro-mechanical System Raster Scan

Influence of Aberrations and Numerical Aperture of an Illumination Microscope Objective on the Quality of Pinhole Diffraction Wave Front

The Theoretical Simulation and Experimental Research on Optical Coherence Tomography (Oct)

Direct Numerical Modeling as a Tool for Optical Coherence Tomography Development: SNR (Sensitivity) and Lateral Resolution Test Target Interpretation

Numerical Simulation and Analysis of Accurate Blood Oxygenation Measurement by Using Optical Resolution Photoacoustic Microscopy

Simulation and Deconvolution of Experimental Oct Image

Super-Resolution Optical Microscopic Imaging Method Based on Annular Illumination with High Numerical Aperture

Monte Carlo Modelling of OCT with Finite-Size-spot Photon Beam

Optical Coherence Tomography: PFMC Model and Endoscopic Probe

Monte Carlo-based Realistic Modeling of Speckles in Fourier-domain Optical Coherence Tomography

Simulation of Penetration Depth of Bessel Beams for Multifocal Optical Coherence Tomography.

Study on the Field Distribution of the Probes in Scanning Near-Field Optical Microscope Using Finite-Difference Time-Domain Calculations

Off-Axis Imaging in Keel-Edge Pinhole Single Photon Emission Computed Tomography System Based on Monte Carlo Simulation

Particle-Fixed Monte Carlo Model for Optical Coherence Tomography

Analysis of the Equivalence of Four Models in OCT Simulation

A Mesh-Based Monte Carlo Study for Investigating Structural and Functional Imaging of Brain Tissue Using Optical Coherence Tomography

3D Monte Carlo Simulation of Light Distribution in Mouse Brain in Quantitative Photoacoustic Computed Tomography