Abstract:Spatially resolved spectroscopy provides a means for measuring the optical properties of biological tissues, based on analytical solutions to diffusion approximation for semi-infinite media under the normal illumination of an infinitely small light beam. The method is, however, prone to error in measurement because the actual boundary condition and light beam often deviate from that used in deriving the analytical solutions. It is therefore important to quantify the effect of different boundary conditions and light beams on spatially resolved diffuse reflectance in order to improve the measurement accuracy of the technique. This research was aimed at using finite element method (FEM) to model light propagation in turbid media, subjected to normal illumination by a continuous-wave beam of infinitely small or finite size. Three types of boundary conditions [i.e., partial current (PCBC), extrapolated (EBC), and zero (ZBC)] were evaluated and compared against Monte Carlo (MC) simulations, since MC could provide accurate fluence rate and diffuse reflectance. The effect of beam size was also investigated. Overall results showed that FEM provided results as accurate as those of the analytical method when an appropriate boundary condition was applied. ZBC did not give satisfactory results in most cases. FEM-PCBC yielded a better fluence rate at the boundary than did FEM-EBC, while they were almost identical in predicting diffuse reflectance. Results further showed that FEM coupled with EBC effectively simulated spatially resolved diffuse reflectance under the illumination of a finite size beam. A large beam introduced more error, especially within the region of illumination. Research also confirmed an earlier finding that a light beam of less than 1 mm diameter should be used for estimation of optical parameters. FEM is effective for modeling light propagation in biological tissues and can be used for improving the optical property measurement by the spatially resolved technique. (C) 2015 Optical Society of America

Monte Carlo Modelling of OCT with Finite-Size-spot Photon Beam

Monte Carlo modeling of optical coherence tomography imaging through turbid media.

Simulation of Optical Coherence Tomography Using Monte Carlo Method

Finite element modeling of light propagation in turbid media under illumination of a continuous-wave beam

Particle-Fixed Monte Carlo Model for Optical Coherence Tomography

Monte Carlo-based Realistic Modeling of Speckles in Fourier-domain Optical Coherence Tomography

Study on effective probe depth of optical coherence tomography system by Monte Carlo simulation

Monte Carlo Simulation of Fourier-domain OCT in Multi-Layered Media

Optical Coherence Tomography: PFMC Model and Endoscopic Probe

Simulation of Penetration Depth of Bessel Beams for Multifocal Optical Coherence Tomography.

Research on the effect of numerical aperture on probing depth of OCT system with new Monte Carlo simulation model

Application of Monte Carlo Simulation Technology in OCT Imaging Contrast

Monte carlo simulation of converging laser beams propagating in biological materials.

Monte Carlo-based Full-Wavelength Simulator of Fourier-domain Optical Coherence Tomography

Imaging Based Tissue Optics: Parallel Monte Carlo Modeling and Phantom Measurements

The Theoretical Simulation and Experimental Research on Optical Coherence Tomography (Oct)

Monte Carlo Simulation for Polychromatic X-ray Fluorescence Computed Tomography with Sheet-Beam Geometry

Enhancing Sensitivity of High Resolution Optical Coherence Tomography Using an Optional Spectrally Encoded Extended Source (conference Presentation)

A Mesh-Based Monte Carlo Study for Investigating Structural and Functional Imaging of Brain Tissue Using Optical Coherence Tomography

Off-Axis Imaging in Keel-Edge Pinhole Single Photon Emission Computed Tomography System Based on Monte Carlo Simulation