Abstract:Three different crystalline forms of Mn 3 O 4 were successfully prepared by a liquid phase method with different additives. Using XRD, SEM, EDS, BET, compacted density and electrochemical analysis, the effects of different additives on the morphology, phase composition, surface characteristics, specific surface area, electrochemical and other physical and chemical properties of manganese oxides were investigated. The results showed that the rod type Mn 3 O 4 was prepared by mixing ammonia water and anhydrous ethanol in a 1 : 1 ratio and an appropriate amount of cetylmethyl ammonium bromide as the additive. The rod-type Mn 3 O 4 showed a maximum specific surface area of 63.87 m 2 g −1 and has the advantages of low compaction density, no introduction of other impurities, and high adsorption potential. It also has excellent electrochemical performance and an impedance of 240 Ω. The specific capacity was as high as 666.5 mA h g −1 at 1C current density and 382.2 mA h g −1 after 200 cycles. The results also showed that the electrochemical performance of Mn 2 O 3 prepared at 700 °C from the rod-type Mn 3 O 4 was the best. When it was used as the anode material of a lithium-ion battery, it showed a high specific capacity of 712.1 mA h g −1 after 200 cycles. Therefore, the rod-type Mn 2 O 3 material has the characteristics of high capacity, low cost and environmental friendliness and is a promising candidate anode material for lithium-ion batteries.

Physical Properties and Electrochemical Performance of Γ-Mno2 with Utrafine Powder

Effects of heat treatment on the physical and electrochemical performance of γ-MnO2

Synthesis And Electrochemical Properties Of Co Doped Mno2 Framework With Nanofibrous Structure

Effects of Heat Treatment on the Physical and Electrochemical Performance of Gamma-Mno2

Fabrication and Electrochemical Performance of Nanofibrous Micro-Frameworks of Α-Mno2

Sodium-Ion-Assisted Hydrothermal Synthesis of Γ-Mno[sub 2] and Its Electrochemical Performance

Synthesis and Characterization of Single Crystalline Mnooh and Mno2 Nanorods by Means of the Hydrothermal Process Assisted with Ctab

Synthesis and Surface Characterization of Γ-Mno2 Nanostructures

The effects of calcination on the electrochemical properties of manganese oxides

Preparation of Ultrafine MnO2 Powders by the Solid State Method Reaction of KMnO4 with Mn(II) Salts at Room Temperature

Facile Synthesis and Characterization of MnO2 Nanomaterials As Supercapacitor Electrode Materials

Preparation of Superfine Γ-Mno2 of Different Shape

Effect of Mn substitution on the microstructure of (MgCoNiZnCu)O powder and its electrochemical performance as an anode material

Electrochemical Performance of Li4Mn5O12 Nano-Crystallites Prepared by Spray-Drying-assisted Solid State Reactions

Preparation and Electrochemical Performance of Nanostructured MnO2 Materials

A Precursor Route to Synthesize Mesoporous Γ-Mno2 Microcrystals and Their Applications in Lithium Battery and Water Treatment

Effects of Surface Modification on Electrochemical Performance of Mno2

Physical Properties and Electrochemical Performance of Limn2o4 Cathode Materials Prepared by A Precipitation Method

Facile Synthesis of Α-Mno2 Nanorods and Their Electrochemical Performances

Effect of Calcining Temperature on the Structure and Electrochemical Performance of Li[Mn1/3Ni1/3C01/3]O2

Characterizations on the microstructures of LiMn2O4 prepared by a simple soft-chemical technique