Experimental study of temperature distribution in long-sized road tunnel

Zhiguo Yan,Qixin Yang,Hehua Zhu
DOI: https://doi.org/10.3321/j.issn:1001-0505.2005.z1.020
2005-01-01
Abstract:To investigate fire behavior in tunnel and improve fire protection in the Qinling long-sized road tunnel, a series of fire testing were conducted. The scopes of the testing include temperature distribution and influential length of hot smoke in the tunnel under fire circumstance. The testing was conducted in a 1:6 scale model. The model tunnel had a circular cross-section with an inner diameter of 1.8 m and 100 m in length. Square fire sources were employed as model fire sources. The air velocity produced by the fans varied from 0 to 10 m/s in different tests. Three different fire loads were used to simulate different fire scenarios. Numerous thermocouples were installed at various cross sections within the tunnel to measure temperatures. Measurements were recorded continuously by the data acquisition system of controller area network. Results indicate that the maximum temperature locates near tunnel ceiling in transverse direction; as for longitudinal temperature distribution, the maximum temperature lies in fire source and the temperature of hot smoke decreases with the distance from fire source. Furthermore, the temperature distribution and influential length of hot smoke in the tunnel vary significantly with air velocity and fire load. The maximum temperature and influential length of hot smoke on tunnel users increase with fire load. The maximum temperature in fire source decreases and influential length of hot smoke increases when air velocity applied in tunnel increases. Based on the experimental results, suggestions on structure protection, criteria of equipment collocation, fire ventilation modes and vehicle controlling under fire scene are proposed.
What problem does this paper attempt to address?