Abstract:Plasma induced vapor phase graft polymerization (PIVPGP) method was applied to modify aramid fiber surface. In this study, aramid fibers were pretreated under various plasma conditions such as different treatment times, output powers and working gases to see how these plasma processing parameters influenced the PIVPGP of acrylic acid (AA) on aramid fiber surface and its surface structure and properties. The analysis results of atomic force microscope (AFM) and X-ray photoelectron spectroscope (XPS) showed the increase of surface roughness and the introduction of O=C OH, which confirmed that the PIVPGP of AA on aramid fiber surface was achieved. The contact angle and interfacial shear strength (IFSS) of the aramid fibers modified by PIVPGP of AA prominently decreased and increased, respectively, indicating the obvious improvements of surface wettability and adhesion between aramid fiber and matrix. The surface modification effects of aramid fiber by PIVPGP of AA firstly increased and then after 15 min slightly decreased with the increasing plasma treatment time, and but firstly increased and then after 300W nearly remained unchanged with the increasing output power, respectively. Among different working gases, Ar plasma occupied first place, O-2 plasma and N-2 plasma came second and third in the aspect of PIVPGP of AA on aramid fiber surface, respectively. It could be concluded that the PIVPGP of AA on aramid fiber surface could effectively improve surface wettability and adhesion. Plasma conditions had signally influence on the efficiency of PIVPGP of AA on aramid fiber surface and its surface structure and properties with the primary sequence of plasma treatment time, output power and working gas. Therefore adequate plasma processing parameters should be carefully selected for the optimum surface modification of aramid fiber by PIVPGP of AA. (C) 2015 Elsevier B.V. All rights reserved.

A Novel Continuously Initiated Polymerization by One-Atmosphere Low Temperature Plasma Device

Bulk Polymerization of Acrylic Acid Using Dielectric-Barrier Discharge Plasma in a Mesoporous Material.

Polymerization of Solid-State Aminophenol to Polyaniline Derivative Using a Dielectric Barrier Discharge Plasma

Electric Field Effect of the Plasma-Initiated Polymerization of Methyl Methacrylate: A Negatively Charged Long-Lived Radical

Numerical Analysis of Plasma Initiated Polymerization

PAA Polymerized Downstream of a High Pressure DBD Plasma

Diagnostics and characterization of a novel multi gas layer RF atmospheric pressure plasma jet for polymer processing

Surface Modification of Aramid Fiber by Plasma Induced Vapor Phase Graft Polymerization of Acrylic Acid. I. Influence of Plasma Conditions

Research progress of atmospheric pressure glow discharge plasma and polymer surface modification

Large-area and uniform surface modification of polymers by barrier discharge plasmas

Experimental Study of Accelerating Surface Charge Dissipation on Polymer Treated by Repetitively Pulsed Discharge Plasmas

Large-Area Surface Modification of Polymers Using A Cold Pulsed Glow Discharge

Surface Modification of Polymeric Materials by Plasma Immersion Ion Implantation

Molecular Tailoring of Surfaces Via Pulsed Plasma Polymerization.

Controllable Modification of Polymer Membranes by Long-Distance and Dynamic Low-Temperature Plasma Flow: Long-Distance and Dynamic Characteristics

In-Situ Iodine Doping Characteristics of Conductive Polyaniline Film Polymerized by Low-Voltage-Driven Atmospheric Pressure Plasma

Surface Treatment of Polymeric Materials by Atmospheric Pressure Glow Discharge Plasma

Exploring the polymerization of bioactive nano-cones on the inner surface of an organic tube by an atmospheric pressure pulsed micro-plasma jet

Plasma Polymerization at Atmospheric Pressure with a New Type of DBD Reactor for Combinatorial Studies: Classification of Precursor Concentration Dependencies

An Introduction And Progress Of A Novel Atmospheric Laminar Plasma Spray Method

Surface modification of polypropylene microporous membrane by plasma and its application for the in situ oligonucleotide synthesis