Abstract:There is a great deal of residual heat under 350 degrees C being released into environment, without being used efficiently. Compared to the Rankine cycle with water as its working substance, it is effective to utilize Organic Rankine Cycle (ORC) to recover these waste heats. In the threshold of this paper, a miniature ORC system is proposed, and maximum efficiency of the system is achieved by means of optimal working substance. Moreover, numerical simulation of the partial admission (epsilon=0.267) high rotational speed radial inflow turbine, which is the key unit in the system, is fulfilled. At the operating rotational speed of 60000 rpm and the proposed thermodynamic parameters, steady and unsteady flow field in the turbine are investigated with R11 as working fluid. The detailed parameters, such as axial force of rotor, power generated and thermal efficiency of the radial turbine, are analyzed. In addition, the unsteady flow pressure is integrated around the rotor blade profile to provide the unsteady aerodynamic blade force. And subsequently frequencies of unsteady disturbances and excitation force factors are obtained by spectrum analysis, which are of key importance for blade response analysis. The generation, development and dissipation process of the secondary flows, passage vortex and leakage vortex are observed in the flow channel. The results reveal that the partial admission greatly influences the parameters distributions in the flow field and the losses of radial turbine mainly occur at the frontier of the passage in the vicinity of blade root. As is discussed in the analysis of excitation force factor, the radial turbine is safe in the operation. The results discussed in this paper are beneficial for the sequent optimization and manufacture of the miniature turbine.

Strength Design And Numerical Analysis Of Radial Inflow Turbine Impeller For A 100kw Microturbine

Aerothermodynamic Design and Numerical Simulation of Radial Inflow Turbine Impeller for A 100kw Microturbine

Experimental And Numerical Investigation On Overall Performance Of A Radial Inflow Turbine For 100kw Microturbine

Integrated Optimization Design for a Radial Turbine Wheel of a 100 Kw-Class Microturbine

Aerodynamic Design and Numerical Investigation on Overall Performance of A Micro Radial Turbine with Millimeter-Scale

Optimization Of High Speed Centrifugal Compressor For A Micro Gas Turbine Based On Cfd And Fem Analysis

Design and Numerical Simulation on Coupled Flow Field of Radial Turbine with Air-Inlet Volute

Experimental Validation of an Integrated Optimization Design of a Radial Turbine for Micro Gas Turbines

Using an Optimisation Strategy to Design a Supercritical CO2 Radial Inflow Turbine Transonic Stator

A FLUID-THERMAL ANALYSIS OF PARTIAL ADMISSION AXIAL TURBINES

Optimization of a Centrifugal Impeller on Blade Thickness Distribution to Reduce Hydro-Induced Vibration

Optimization method investigation for centrifugal pump performance based on 3D inviscid inverse design

Multidisciplinary Design Optimization of Twin-Web Turbine Disk with Pin Fins in Inner Cavity

Aerodynamic Optimization of the Radial Inflow Turbine for A 100Kw-Class Micro Gas Turbine Based on Metamodel-Semi-Assisted Method

Aerodynamic Design and Optimization of a Radial Inflow Millimeter-Scale Turbine

Investigation on Design Flow of a Millimeter-Scale Radial Turbine for Micro Gas Turbine

Experimental Investigation on Overall Performance of a Millimeter-Scale Radial Turbine for Micro Gas Turbine

Investigation Of Impeller Strength For A Cryogenic Liquid Turbiine

An Investigation On Dynamic Characteristics Of A High Speed Rotor With Complex Structure For Microturbine Test Rig

Optimization of Impeller Parameters for Hydrodynamic Turbine Based on Multi-Objective Orthogonal Test Design

Study On The Steady And Unsteady Aerodynamic Performance Of A Radial Inflow Turbine With Small Partial Admission In A Miniature Orc System