Abstract:The aim of present study is increasing the degradation and mineralization of 4-chlorophenol (4-CP) during electrochemical oxidation with Ti/RuO2 anodes. Innovatively, the evolution of chlorine-related species and the formations of various inorganic ions were investigated by electrolytic analysis in order to set up whether the formation and consumption of these byproducts associated with either chemical or electrochemical reactions. The effect of operating parameters such as current density, solution pH, treatment time, and electrolyte concentration has been studied. The formation of Cl2, chlorite (ClO2-), and chlorate (ClO3-) were detected by adding the known concentration of Cl- ions at different pH and current densities. Concentration trends of active chloro-species indicate that the degradation of 4-CP and chemical oxygen demand (COD) removal was formed maximum at pH 6 and j of 225.2 Am-2 in presence of 0.0085 M NaCl. Thus, the 4-CP degradation mainly depends on the radicals and active chlorine formation and a mineralization mechanism was proposed based on intermediates byproducts formation such as catechol, hydroquinone, 1, 4-benzoquinone, and organic acids identify by using the GC-MS and HPLC analysis at the optimum treatment condition. Total organic carbon (TOC) at different pH and current density, mass balance analysis of carbon and inorganic species formation were determined at the optimum treatment conditions of 4-CP. The degradation kinetic of 4-CP was followed the pseudo-first order kinetic model during the each parameters optimization. Specific energy consumption and current efficiency were also used to identify the technical feasibility of the process.

Degradation of 4-Cp in an Internal Electrolysis System

The Co-Activation of Persulfate with Tannic Acid and Sodium Hydroxide for the Degradation of p-Chlorophenol

Degradation Performance of 4-Chlorophenol as a Typical Organic Pollutant by a Pulsed High Voltage Discharge System

Catalytic Degradation of 4-Chlorophenol with La/TiO2 in a Dielectric Barrier Discharge System

An electrohydraulic discharge system of salt-resistance for p-chlorophenol degradation.

Degradation mechanisms of 4-chlorophenol in a novel gas-liquid hybrid discharge reactor by pulsed high voltage system with oxygen or nitrogen bubbling.

Degradation of 4-Chlorophenol using a Gas–Liquid Gliding Arc Discharge Plasma Reactor

Degradation of 4-Chlorophenol by High-Voltage Pulse Corona Discharges Combined with Ozone

Effect of current density and pH on the electrochemically generated active chloro species for the rapid mineralization of p-substituted phenol

The role of oxygen in the degradation of p-chlorophenol by Fenton system.

[Degradation of 4-Chlorophenol in Aqueous Solution by High-Voltage Pulsed Discharge-Ozone Technology].

Degradation of 4-chlorophenol through in situ generation of reactive chlorine species in a Zn 2 CoO x electrocatalytic system

Removal of 4-Chlorophenol from Polluted Water by Aluminum-Iron Alloys.

Selective electrochemical degradation of 4-chlorophenol at a Ti/RuO2-IrO2 anode in chloride rich wastewater

Complete Degradation of 2,4-Dichlorophenol in Sequential Sulfidated Nanoscale Zero-Valent Iron/peroxydisulfate System: Dechlorination, Mineralization and Mechanism

The cooperative electrochemical oxidation of chlorophenols in anode-cathode compartments

Electrochemical activation of peroxymonosulfate with titanium suboxide anode for 4-chlorophenol degradation: Influencing factors, kinetics, and degradation mechanism

Degradation of 4-Chlorophenol by Means of Fenton Oxidation Processes: Mechanism and Kinetics

Degradation of O-Cp by Pulsed High Voltage Discharge in Water

Electrocatalytic degradation of 4-chlorophenol on F-doped PbO2 anodes

Degradation characteristics of toxic contaminant with modified activated carbons in aqueous pulsed discharge plasma process