Abstract:The influence of the varying buoyancy effects on heat transfer characteristics was experimentally and numerically investigated. Different pressures, heat fluxes, and inclination angles were selected to alter the buoyancy effect. Operating parameters were varied (Pressure varied from 25 MPa to 29 MPa, mass flux varied from 800 kg/(m(2)center dot s) to 2294 kg/(m(2)center dot s), heat flux varied from 500 kW/m(2) to 714 kW/m(2), and the inclination angle varied from 0 degrees to 90 degrees). The comparison of heat transfer characteristics between 2000 kg/(m(2)center dot s) and 2294 kg/(m(2)center dot s) was conducted by experiments, showing that the average heat transfer coefficients at G = 2000 kg/(m(2)center dot s) are better than those at G = 2294 kg/(m(2)center dot s) due to the different buoyancy effects. The comparison between 650 kW/m(2) and 714 kW/m(2) showed that the heat transfer characteristics improve with the increase in heat flux under a high mass flux condition. Moreover, a 3-D numerical model was built for predicting the heat transfer characteristics in inclined tubes. The influence of buoyancy effects induced by the different inclination angles on the heat transfer characteristics was investigated numerically. The numerical results showed that the buoyancy effect is evident at G = 800 kg/(m(2)center dot s). The buoyancy effects reflect in the velocity of secondary flow, fluid temperature, and temperature gradient of boundary layers. The influence of pressure on the heat transfer characteristics reflects in the radial distributions of properties. The temperature and temperature gradient are higher at the bottom of the 75 degrees inclined tube and the top of the 15 degrees inclined tube, resulting in a decline in the heat transfer coefficients. Finally, the ratio of vorticity and Reynold's numbers (Se/Re) was adopted as a criterion to predict the buoyancy effects in the inclined tubes, and the results showed that Se/Re is suitable for evaluating buoyancy effect.

Influence of Buoyancy on the Combustion Field Within a Spherical Tank

Numerical Simulation of the Whole Body Heat Treatment of a Large Spherical Tank

Influence of the Baffle-Board on the Inner Flow of a Spherical Tank During the Whole-Body Heat Treatment

Numerical Simulation and the Improved Whole-Body Heat Treatment of a Large Spherical Tank

Numerical Simulation of Internal Gaseous Explosion Loading in Large-Scale Cylindrical Tanks with Fixed Roof

Simulation of Turbulent Non-Premixed Flames Influenced by Buoyancy

Modelling the Combustion of Thermally Thick Biomass Particles

Numerical Study Of The Effects Of Different Buoyancy Models On Supercritical Flow And Heat Transfer

Modeling of Supercritical-Pressure Turbulent Combustion of Hydrocarbon Fuels Using A Modified Flamelet-Progress-Variable Approach

A Mixture Fraction-Based Model and Axial Thermal Positions for Buoyancy/Momentum-Controlled Jet Diffusion Flames

Study on the Plume Flow Behavior and Air Entrainment Characteristics of Co-Burning Fires

Characterizing the Flame Geometries and Radiation of Axisymmetric Turbulent Buoyant Diffusion Flames Based on 3D Reconstruction

Study of Heat Transfer and Stable Combustion Mechanism of Burners

Effect of Non-Uniform Electric Field on Spherical Flame Characteristics

The Model of Mass and Heat Transfer in LPG Tanks Partially Exposed to Jet Fire

Experiments and modeling of the temperature profile of turbulent diffusion flames with large ullage heights

Numerical study of radiation model and diffusion effects on combustion in porous media

A Numerical Investigation in Buoyancy Effects on Micro Jet Diffusion Flame

Experimental and Numerical Investigations on the Influence of Buoyancy on Supercritical Water Heat Transfer Characteristics in Inclined Smooth Tubes

Stability of Buoyant Inverse Diffusion Methane Flames with Confinement Effects

Technical Brief: Predictions of Flow Field for Circular-Disk Bluff-Body Stabilized Flame Investigated by Large Eddy Simulation and Experiments