Abstract:Hydroisomerization of n -alkanes catalyzed by metal-zeolite bifunctional catalysts is an important process to produce clean biofuels. The employment of appropriate growth modifiers during the synthesis of hierarchical zeolites to increase the iso -alkane yield has captured much attention. In this work, cetyltrimethylammonium bromide (CTAB) and polydiallyl dimethyl ammonium chloride (PDDA), representatives of cationic surfactants and cationic polyelectrolytes, are added to the initial gel to one-pot synthesize hierarchical ZSM-23 zeolites (Z23- x PC and Z23- y PP) via the bottom-up strategy. The corresponding Pd/ZSM-23 catalysts are prepared by loading 0.5 wt% Pd on microporous and hierarchical ZSM-23 and tested for the hydroisomerization of n -hexadecane. Due to the cationic adsorption of CTAB or steric hindrance effect of PDDA, Z23- x PC and Z23- y PP samples all demonstrate enhanced mesoporosity compared with the conventional microporous Z23-P sample. The diffusivity experiments indicates that the D/L 2 values decrease in the order of Pd/Z23-5PP > Pd/Z23-3PC > Pd/Z23-P, suggesting that the hydrocarbons diffusion in the channel of hierarchical ZSM-23 samples is evidently improved. In addition, the Brønsted acid densities of the Z23- x PC and Z23- y PP samples are also evidently reduced compared to that of the microporous Z23-P sample because of the proportion decreases of framework Al atoms at T2-T5 sites. Compared with the microporous Pd/Z23-P catalyst, the appropriate addition amount of growth modifiers can evidently improve the yield of iso -hexadecane products and limit the cracking process. Especially for the Pd/Z23-5PP catalyst, the cracking process is effectively limited and the maximum iso -hexadecane yield of 75.4% is obtained at an n -hexadecane conversion of 88.8% at 290 °C, which is the highest among all catalysts. Therefore, this work has provided an effective method for the simple preparation of bifunctional catalysts with improved diffusion performance and more favorable metal–acid balance.

INVESTIGATION ON Pd/Beta CATALYST IN HEXANE ISOMERIZATION

Investigation on Properties of Pd/HZSM-5 Catalysts for Hexane Isomerization

Effect of γ-Al2O3 Pore Structure on Activity of Supported Pd Catalysts in C9 Petroleum Resin Hydrogenation

Influence of Preparation Condition on the PdHx Phase of Pd/C Catalyst

Studies on hydroisomerization catalysts

The synergic effects of highly selective bimetallic Pt-Pd/SAPO-41 catalysts for the n-hexadecane hydroisomerization

Selective Hydrogenation Of Phenylacetylene Over Pd-Cu/Gamma-Al2o3 Catalysts

Isomerization of Alkane on Molecular Sieves Catalyst Loaded with Palladium

The hydroisomerization of n-hexadecane over Pd/SAPOs bifunctional catalysts with different opening size: Features of the diffusion properties in pore channels and the metal-acid synergistic catalysis

Hydrogenation of High-Concentration Monovinylacetylene for Butadiene Production over Pd-Pb/SiO2 Catalysts

Preparation of Pd/Ce(F)-MCM-48 catalysts and their catalytic performance of n-heptane isomerization

Breaking scaling relationships in alkynol semi-hydrogenation by manipulating interstitial atoms in Pd with d-electron gain

The effects of growth modifiers on the catalytic performance of hierarchical Pd/ZSM-23 bifunctional catalysts for n-hexadecane hydroisomerization

Ag promoted Pd-based catalyst for selective hydrogenation of C4 fraction

Synergetic effect between the metal and acid sites of Pd/SAPO-41 bifunctional catalysts in n-hexadecane hydroisomerization

A High Efficient Cupd0.1/Γ-Al2o3 Catalyst with Isolated Pd Species for Co2 Hydrogenation to Methanol

Influences of the metal-acid proximity of Pd-SAPO-31 bifunctional catalysts for n-hexadecane hydroisomerization

Preparation of Pd/Ce(F)-MCM-48 catalysts and their catalytic performance of <i>n</i>-heptane isomerization

Regulating Pd/Al2o3 Catalyst By G-C3n4 Toward The Enhanced Selectivity Of Isoprene Hydrogenation

Influence of Iridium Content on the Performance and Stability of Pd–Ir/C Catalysts for the Decomposition of Hydrogen Iodide in the Iodine–sulfur Cycle