Abstract:To effectively solve the problem of wastewater pollution, in this paper, corn starch, 3-chloro-2-hydroxypropyl trimethylammonium chloride (CTA), vinyl acetate (VAC), and methylacryloxyethyltrimethylammonium chloride (DMC) were used as raw material, etherifying agent, esterifying agent, and grafting monomer, respectively. A starch (St)-based natural polymer cationic flocculant (DMSt-g-DMC) was prepared via etherification, esterification, and grafting copolymerization triple modification. This study is of great significance for the removal of dyes from wastewater. There are two keys to success. First, DMSt-g-DMC not only enhances flocculation but also improves water solubility through triple modification. Second is grafting reaction, in which the number of positive charges in the main chain of the DMSt-g-DMC macromolecule is further increased and its molecular structure adjusted to give full play to its electrical neutralization, bridging, and net trapping effects on anionic dyes in the water, so as to achieve the purpose of improving the flocculation effect. The removal rates of DMSt-g-DMC were 94.1% for Acid Light Yellow G, 83.7% for Reactive Brilliant Blue X-BR, and 97.1% for Direct Lake Blue 5B. DMSt-g-DMC not only has a wide flocculation window but also maintains good flocculation performance in a wide pH range, which is conducive to the treatment of wastewater with high alkalinity and complex composition. Finally, the removal rate of dye was tested when DMSt-g-DMC and PAC were flocculated together; the dosages of DMSt-g-DMC and PAC were 70 and 100 mg/L, respectively. The removal rates of Disperse Red GS, Disperse Yellow 2G-FL, and Direct Lake Blue 5B reached 87.5, 89.8, and 95.6%, respectively. In addition, DMSt-g-DMC and PAC remained stable after a long flocculation time, which may bring far-reaching changes if applied in industrial wastewater treatment.

Cleaning efficiency of process water in newsprint mill

Effect of Different Chemical Treatments on the Dispersion Properties of Carbon Fiber and Paper Properties

Effect of Fixing Agent Dosage on the Mechanism of Colloidal Substances Retention Onto Pulp

Effect of DCS in Recycled White Water on Deinking and Bleaching of Old Newspaper

Screening for Particular Pollutants in Regenerated Papermaking Wastewater and Study of Their Migration and Transformation

Pretreatment of a textile wastewater from alkali reduction,printing and dyeing operations

TREATMENT OF WASTEWATER FROM WHITE CARD PAPER PRODUCTION WITH INCLINED SCREEN-FLOCCULATION SEDIMENTATION-A/O PROCESS

Improvement of alum and PACl coagulation by polyacrylamides (PAMs) for the treatment of pulp and paper mill wastewater

Accumulation of dissolved and colloidal substances in water recycled during papermaking

Coagulation-flocculafion Treatment of Wastewater from Reconstituted Tobacco Sheet Manufacturing by Papermaking Process

Using Fixing Agents To Improve Adsorption Of Wet End Chemicals Onto A Bleached Chemithermo- Mechanical Pulp

Treatment of Papermaking Mill Wastewater

EFFECT OF FIXING AGENTS ON THE AMOUNT OF WET END CHEMICALS ADSORBED ONTO A BLEACHED CHEMITHERMOMECHANICAL PULP

Integrated Process Combined with Fenton Reaction for the Treatment of Papermaking Deinking Wastewater

Application analysis of Fenton /flocculation process for advanced treatment of pulp and papermaking wastewater

Study on the interactions between dissolved and colloidal substances under the treatment of fixing agents in papermaking

Pulp and Paper Mill Effluent Treated by Combining Coagulation-Flocculation-Sedimentation and Fenton Processes

Preparation of Starch-Based Cationic Flocculants and Its Study on the Removal of Textile Dyes

Optimization of the Coagulation-Flocculation Process for Pulp Mill Wastewater Treatment Using a Combination of Uniform Design and Response Surface Methodology

Developing an Efficient Processing System Treatment for the High Concentration of Eucalyptus Chemical Mechanical Pulp Wastewater

Flocculation behaviors of a novel papermaking sludge-based flocculant in practical printing and dyeing wastewater treatment