Abstract:The reactive extrusion of maleic anhydride grafted polypropylene (PP-g-MAH) with ethylenediamine (EDA) as coupling agent was carried out in a co-rotating twin-screw extruder to produce long chain branched polypropylene (LCBPP). Part of PP-g-MAH was replaced by maleic anhydride grafted high-density polyethylene (HDPE-g-MAH) or linear low-density polyethylene (LLDPE-g-MAH) to obtain hybrid long chain branched (LCB) polymers. Compared with the linear PP, PE and their blends, the LCB polyolefins exhibit excellent dynamic shear and transient extensional rheological characteristics such as increased dynamic modulus, higher low-frequency complex viscosity, significantly enhanced melt strength and strain-hardening behaviors. LCB polymers also have higher tensile strength, tensile modulus, impact strength and lower elongation at break than linear polymer and their blends. Supercritical carbon dioxide (scCO2) was introduced in the reactive extrusion process. With the presence of scCO 2, the motor current of twin extruder was decreased and LCB polyolefins with lower MFR, higher complex viscosity and increased tensile strength and modulus were obtained. This indicates that the application of scCO2 can reduce the viscosity of melt in extruder, enhance the diffusion of reactive species, facilitate the reaction between functional groups, and increase the LCB density. The foaming behavior of both linear and LCB polyolefins were studied. The results show that cellular materials produced from the LCB polyolefins have higher weight reduction, smaller cell size and better mechanical properties than those produced from the linear polymers.

Studies on the Experiment of Reactive Extrusive Processes for the Synthesis of Polystyrene

Evolution of residence time distribution and fill degree in co-rotating twin-screw extruder

STUDIES ON BULK SYNDIOTACTIC POLYMERIZATION OF STYRENE CATALYZED BY METALLOCENE

Characteristic analysis on a reactive extrusion process for the imidization of poly(styrene-co-maleic anhydride) with aniline

Reactive Extrusive Processes for the Synthesis of Styrene/Butene Multi-block Copolymer

Effect of stirring speed and its change time on phase inversion of high impact polystyrene

Advanced in Polysiloxane-Based Thermoplastic Dynamic Vulcanizate by Reactive Extrusion

Rheology of Ultra High Molecular Weight Polystyrene

Control of Diffusion/Barrier Effects of Polymer-Coated Particles and the Strengthening of Ethylene Polymerization Reactor

Influence of Selection of Extruders on the Processing of Recycled PET Flakes

Simulation of the Reactive Extrusion Process of Styrene in a Modular Intermeshing Co-rotating Twin Screw Extruder

Intensification of Polymerization Processes by Reactive Extrusion

Two New Polymerization Processes for the Preparation of Porous PVC Resin

Methyl Methacrylate-Styrene Copolymers Prepared by Utilizing the Trommsdorff Effect in an Inverted Two-Stage Extruder

The Trommsdorff Effect under Shear and Bulk Polymerization of Methyl Methacrylate Via Reactive Extrusion

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

Anionic Bulk Polymerization to Synthesize Styrene-Isoprene Diblock and Multiblock Copolymers by Reactive Extrusion

Well-Defined High Molecular Weight Polystyrene with High Rates and High Livingness Synthesized via Two-Stage RAFT Emulsion Polymerization.

Simulation and analysis of bulk polystyrene reaction process

Styrene-Isoprene Copolymers with High Rubber Contents Prepared by Reactive Extrusion

Polymer Mixing Effect in a Series Disc Extruder