Binocular Vision-Based Method Used for Determining the Static and Dynamic Parameters of the Long-Stroke Shakers in Low-Frequency Vibration Calibration
Ming Yang,Wenfeng Liu,Zhihua Liu,Chenguang Cai,Ying Wang,Jing Yang
DOI: https://doi.org/10.1109/tie.2022.3208559
IF: 7.7
2023-03-22
IEEE Transactions on Industrial Electronics
Abstract:The long-stroke shaker is essentially required for the calibration of low-frequency vibration transducers, whose performance parameters have significant impact on the calibration accuracy. The accurate measurement of these parameters is the prerequisite to establish a reliable vibration metrology and traceability system. Currently, an optical collimator or a reference accelerometer is applied to get the static parameter, the laser interferometry or triaxial sensor-based method is used to obtain the dynamic parameters. However, the former relies on an extra device which increases the complexity and cost of calibration system, and the latter is always difficult to accomplish the accurate and efficient measurement of these parameters. In this study, a binocular vision-based long-stroke shaker performance measurement method is investigated, which has ability to determine the static and dynamic parameters simultaneously during the calibration. This vision method obtains the shaker's bending by measuring the inclinations at the different positions of its guideway, and achieves the amplitude characteristic, distortion, repeatability as well as transverse ratio measurements by accurately acquiring the spatial displacements at different frequencies. Comparison experiments with the two commonly used inclination estimation methods, and the laser interferometry and sensor-based method demonstrate that the investigated method is able to get the satisfactory accuracies both for the static and dynamic parameters of long-stroke shaker in vibration calibration.
automation & control systems,engineering, electrical & electronic,instruments & instrumentation