Abstract:The relative content of carboxyl and hydroxyl groups on carbon nanotubes (CNTs) was tuned through a controlled reduction process. It was found that the CNTs decorated by varying ratio of carboxyl and hydroxyl groups can obviously enhance the catalytic activity of supported vanadium oxide catalysts for selective catalytic reduction (SCR) of NO with NH3. The improvement effects induced by carboxyl and hydroxyl groups depend significantly on the reacting feedstock with and without SO2 and H2O. In the absence of SO2 and H2O, hydroxyl-modified CNT supported vanadium oxide (Vx+yO2−z (x⩽4)/CNTs-OH) shows more significant improvement on SCR activity, while more obviously promoting effect was observed over carboxyl-modified CNT supported vanadium oxide (Vx+yO2−z (x⩽5)/CNTs-COOH) catalyst in the presence of SO2. The variation in oxidation states of active vanadium species (V5+, V4+ and V3+) originated from the electronic interactions between carboxyl and hydroxyl modified CNTs and vanadium precursors are indicated to be the main reason for the very different SCR performances over the two Vx+yO2−z/CNTs catalysts. Low valence V4+ and V3+ species show much higher SCR activity in the absence of SO2 and H2O, while the high valence V5+ species are very beneficial to NO reduction in the presence of SO2. The V5+ species have an excellent catalytic ability of oxidizing SO2 to SO3, leading to the in situ formation of ammonium sulfate, and are capable of catalyzing the reaction between the sulfate salts and NO. Furthermore, both of the Vx+yO2−z/CNTs catalysts are very stable for SCR of NO even in the presence of SO2 and H2O. These findings give some insight into the mechanisms behind the SCR reaction over CNT supported vanadium oxides, which would be beneficial to the design and synthesis of more efficient and much stable SCR catalysts.

Effect of Pretreatment on Simultaneous So2 and No Removal Activity over Activated Carbon Honeycomb Supported V2o5 Catalysts at Low Temperatures

Effect of V2O5 Loading on Simultaneous SO2 and NO Removal Activities over an Activated Carbon Honeycomb Supported V2O5 Catalysts

Effect of Nitric Acid Pretreatment on the Properties of Activated Carbon and Supported Palladium Catalysts

MECHANISM OF NH3 REGENERATION TO IMPROVE NO REMOVAL ACTIVITY OF ACTIVATED CARBON HONEYCOMB SUPPORTED V2O5 CATALYST

Effect of SO2 on Activated Carbon Honeycomb Supported CeO2–MnOx Catalyst for NO Removal at Low Temperature

Effect of Preparation Condition on NO Removal Activity over Activated Carbon Honeycomb Supported MnOx Catalyst

Effect of pre-oxidation process on V2O5/AC catalyst for the selective catalytic reduction of NOx with NH3

Effects of SO2 and H2O on low-temperature NO conversion over F-V2O5-WO3/TiO2 catalysts

Effects of H2O and SO2 on the Performance of V2O5/TiO2 Catalysts for Selective Catalytic Reduction of NO in Flue Gas

Simultaneous removal of NO x and SO 2 by low-temperature selective catalytic reduction over modified activated carbon catalysts

SiO_2-supported vanadium oxide catalyst for SO_2 and NO removal

Effect of MoO3 on Vanadium Based Catalysts for the Selective Catalytic Reduction of NOx with NH3 at Low Temperature.

Significant Catalytic Effects Induced by the Electronic Interactions Between Carboxyl and Hydroxyl Group Modified Carbon Nanotube Supports and Vanadium Species for NO Reduction with NH3 at Low Temperature

Effect of CO-pretreatment on the CuO-V2O5/gamma-Al2O3 catalyst for NO reduction by CO

SO2-promoted reduction of NO with NH3 over vanadium molecularly anchored on the surface of carbon nanotubes

Pd Catalyst Supported on Activated Carbon Honeycomb Monolith for CO Oxidation and the Application in Air Purification of Vehicular Tunnel

Simultaneous removal of SO2 and NO by CO reduction over prevulcanized Fe2O3/AC catalysts

NOxRemoval over V2O5/WO3–TiO2Prepared by a Grinding Method: Influence of the Precursor on Vanadium Dispersion

Effect of Metal Additives on the Catalytic Performance of MnOx-CeO2 Supported on Activated Carbon Hon Eycomb in NO Removal at Low Temperature

Promotional effect of colloidal alumina on the activity of the In/HZSM-5 catalyst for the selective reduction of NO with methane