Abstract:Commercially pure titanium specimens are subjected to three different treatments, and their bioactivity are evaluated by immersing the specimens in a simulated body fluid (SBF, Kokubo's recipe) for various periods up to 7 days, with particular attention being paid to the differences in apatite deposition between surfaces open to SBF and surfaces in contact with the container's bottom. The treatment with a H(2)O(2)/HCl solution at 80 degrees C for 30 min followed by heating at 400 degrees C for 1 h produces an anatase titania gel layer on the specimen surface. This gel layer deposits apatite both on the contact and on open surfaces, and apatite deposition ability does not change with pre-staking in distilled water. The treatment with a NaOH solution at 60 degrees C for 3 days produces a sodium titanate gel layer. This gel layer can deposit apatite only on the contact surface, and the apatite deposition ability is completely lost after 1 day of pre-staking in distilled water. It is concluded, therefore, that the bioactivity of the titania gel originates from the favorable structure of the gel itself while the bioactivity of the sodium titanate gel depends heavily on ion release from the gel. The third treatment, a simple heat treatment at 400 degrees C for 1 h, produces a dense (not porous) oxide layer on the specimen surface. The specimens can deposit apatite on the contact surface after only 3 days of staking in SBF, but they cannot deposit apatite on the open surface for up to 2 months of staking. The implications of such apatite deposition behavior have been discussed in relation to the environments of titanium implants in bone as well as to the methodology of the SBF staking experiment.

Surface and interface analysis of HAP/TiO2 composite films on Ti6A14V

Surface and interface analysis of HAP/TiO2 composite films on Ti6Al4V

Characterisation and Mechanical Adhesion of HAP/TiO2 Composite Films on Ti6Al4V Processed by Sol-Gel Method

A Comparative Study of in Vitro Apatite Deposition on Heat-, H(2)O(2)-, and NaOH-treated Titanium Surfaces.

Preparation and biological evaluation of Nano-HA coating on tatinium surfaces

Biocompatibility and Corrosion Protection Behaviour of Hydroxyapatite Sol-Gel-Derived Coatings on Ti6Al4V Alloy

Bioactive Composite Coating on Titanium Implants for Hard Tissue Repair

Cross-sectional Analysis on Microstructure of Plasma-Sprayed HA+TiO 2 Composite Coatings on Titanium Substrate

Sol–gel preparation of bioactive apatite films

Preparation of Hierarchical Porous Structure on Ti Surface and Bioactivity

In-situ construction of the nanostructured TiO 2 /TiN composite films by induction heat treatment: Improved mechanical, corrosion, and biological properties

Fabrication and properties of HAP-bioglass-Ti6Al4V composite

Preparation and characterization of hydroxyapatite coatings on Ti6Al4V alloy by a sol-gel method

Microstructure and in Vitro Bioactivity of 50ti/ha Biocomposite

PREPARATION OF BIOACTIVE FILM ON Ti6Al4V

Preparation and Characterization of Manganese and Fluorine Co-Modified Hydroxyapatite Composite Coating

Characterization and tribological investigation of sol–gel ceramic films on Ti–6Al–4V

High-resolution Transmission Electron Microscopy Investigations of a Highly Adhesive Hydroxyapatite Coating/titanium Interface Fabricated by Ion-Beam-assisted Deposition.

Characterization of Hydroxyapatite and Titanium Coatings Sputtered on Ti-6Al-4V Substrate.

Characterization of Functionally Graded Hydroxyapatite/titanium Composite Coatings Plasma‐sprayed on Ti Alloys

Preparation and Properties of Hydroxyapatite-Ti composite Thin Films by Co-sputtering Method for Biocompatibility Applications