Abstract:In plasma sprayed coatings, pores are the primary microstructure, and their features such as porosity, shape, and orientation significantly influence the thermal insulation and elastic properties of the coatings. Therefore, the ultrasonic characterization of pore feature parameters plays a crucial role in guiding the processing and predicting the lifespan of coatings. However, the coupling of multiple pore feature parameters leads to ill-posed problem and nonlinearity between these parameters and the ultrasonic feature signals, making it challenging to identify multiple pore feature parameters accurately. In this study, based on the “ultrasonic - elasticity - structure” interaction mechanism, a novel strategy for the ultrasonic quantitative identification of pore feature parameters and elastic constants in plasma sprayed coatings is proposed. Firstly, a random pore model (RPM) was developed to reveal the complex morphology of pores in plasma sprayed coatings. The porosity, average aspect ratio, orientation factor, and contour roughness factor were statistically analyzed for 15 sets of constructed RPMs, followed by ultrasonic finite element simulations. Then, a sensitivity matrix (SM) inversion method is developed for the “ultrasonic - elasticity” relationship by accurately measuring the elastic constants of the coatings through ultrasonic wave velocity inversion at multiple angles, yielding a relative error of only 0.57%. Lastly, a Multi-output Support Vector Regression machine learning model optimized by genetic algorithm (GA-MSVR) was proposed to establish the “elasticity - microstructure” relationship and identify multiple pore feature parameters based on elastic constants. The maximum relative errors for the four pore feature parameters are found to be 12.28%, 6.35%, 18.87%, and 7.62%, respectively, demonstrating the feasibility of the proposed strategy. Furthermore, the sensitivity matrix was employed to explain the cause for the larger relative error of the orientation factor. In , a challenging task of quantitatively identifying pore feature parameters in plasma sprayed coatings is addressed by proposing a novel solving strategy based on the “ultrasonic - elasticity - microstructure” interaction mechanism. The developed RPM, SM inversion method, and GA-MSVR model contribute to the accurate and comprehensive identification of pore feature parameters. The results obtained validate the feasibility of the proposed strategy.

Thickness Measurement Approach for Plasma Sprayed Coatings Using Ultrasonic Testing Technique

A Novel High-Frequency Ultrasonic Approach for Evaluation of Homogeneity and Measurement of Sprayed Coating Thickness

A Novel Laser Ultrasonic Thickness Measurement Method for Metal Plate Based on Spectral Analysis

The Method of Ultrasonic Thickness Measurement for Surface Coatings Materials Based on Spectral Analysis

Evaluation on the Plasma-Sprayed WC-Co Coating Using Ultrasonic Wave Technology

Nondestructive Measurement of Elastic Modulus for Thermally Sprayed WC-Ni Coatings Based on Acoustic Wave Mode Conversion by Small Angle Incidence

Ultrasonic Characterization for the Inhomogeneity of Thermal Barrier Coating Based on the Sound Pressure Reflection Coefficient Phase Spectroscopy

Evaluation of Thickness for Nicraly Coatings Sprayed on the Superalloy by Using Ultrasonic Spectral Analysis

Application of Water Immersion Ultrasonic C-scan System in Defect Detection of Plasma Spraying Targets

Simultaneous Thickness, Velocity, Density, and Attenuation Measurement of a Thin Layer by Time-Resolved Acoustic Microscopy

In Situ Spatially Resolved Coating Thickness Measurements in Thermal Spraying

Topcoat Thickness Measurement of Thermal Barrier Coating Using Grating Laser Acoustic Spectrum Method

Quantitative characterization of microstructures and elastic properties in plasma sprayed coatings based on “Ultrasonic – Elasticity – Microstructure” interaction mechanism

Research on Ultrasonic Testing Methods for Adhesion Quality of Ceramic Coatings

Thickness Measurement Using Ultrasonic Scanning Method for Large Aerospace Thin-Walled Parts

Comparative Research on Ultrasonic and THz Methods for Thickness Measurement of Thermal Barrier Coatings

High Precision Ultrasonic Measurement Method for Thin-Walled Parts

Sensitivity-matrix-based Identification of Anisotropic Elastic Constants and Microstructure Features in Plasma Sprayed Coatings Utilizing Ultrasonic Back-Reflection

Cohesive Strength of Plasma Sprayed Ni-10wt.%Al Coatings Enhanced by Ultrasonic and Depended on the Power Density

Ultrasonic Resonance Measuring for the Thickness of Ceramics Coatings

Thickness Determination of Dual-Layer Coatings Based on Ultrasonic Spectral Filtering