Abstract:A novel bio-based benzoxazine resin (phenolphthalein-furfuramine-benzoxazine , PTL-F-BOZ) , used bio-based furfurylamine , phenolphthalein , and paraformaldehyde as raw materials , was synthesized and characterized by Fourier transform infrared spectroscopy (FTIR) , nuclear magnetic resonance (H-1 NMR and C-13 NMR) . The curing , thermal and flame retardant properties were analyzed by differential scanning calorimetric (DSC) , thermogravimetric analyzer (TG) , limiting oxygen index (LOI) , vertical burning test, microscale combustion calorimetry (MCC) , cone calorimeter(Cone) and scanning electron microscope (SEM) . The DSC curve of PTL-F-BOZ showed a two-stage curing with two maxima at 224 and 251 degrees C respectively, and had lower curing temperature than that of the traditional fossil-based bisphenol benzoxazine bisphenol A-aniline benzoxazine (bisphenol A-aniline-benzoxazine , BPA-A-BOZ) . The presence of the furan ring in the furfurylamine increased the cross-linking density of polymer, retarded the rearrangement reaction from the phenoxy structure to the phenol structure, and resulted in two curing peaks in the DSC curve of PTL-F-BOZ. Under nitrogen and air atmospheres, the temperatures of 5% mass loss (T-5%) for PPTL-F-BOZ resin were 380 and 370 degrees C , respectively and the residual chars at 800 degrees C were 63. 0% and 10. 5% , respectively. Compared with PBPA-A-BOZ resin, PPTL-F-BOZ resin both possessed higher T-5% and residual char of 800 degrees C. From the DTG curve , the maximum mass loss rates of two decomposition stage (Peak 1 and Peak 2 values) of PPTL-FBOZ resin were 0. 67%/min and 3. 28%/min, which were only 7. 38% and 63. 44% of PBPA-A-BOZ (9. 07%/min and 5. 17%/min) under nitrogen atmosphere , and those were also the same under air atmosphere. LOI of PPTL-F-BOZ resin was 36. 2%, which was higher than that of PBPA-A-BOZ resin. Meanwhile, in the UL-94 test, PPTL-F-BOZ resin extinguished quickly and released less smoke during combustion process, and the original morphology was kept well and a stable carbon layer was formed after burning. Its first ignition time(t(1)) and second ignition time(t(2)) were 1. 4 and 8. 5 s , respectively , far smaller than the maximum permissible values of 10 s, and a UL94 V-0 rating was also achieved. Hence, PPTL-F-BOZ resin showed excellent thermal and flame retardant properties.

Synthesis and Thermal Properties of Polybenzoxazole from Soluble Precursor with Hydroxy-Substituted Polyenaminonitrile

Synthesis and Properties of a Novel Bio-based Benzoxazine

Novel Full Bio-Based Phloroglucinol Benzoxazine Resin: Synthesis, Curing Reaction and Thermal Stability

Synthesis of thermotropic polybenzoxazole using 3-amino-4-hydroxybenzoic acid

Study on Synthesis and Properties of Poly(p-Phenylene-benzobisoxazole)(pbo)fiber

Synthesis of Fluorinated Polybenzoxazoles with Low Dielectric Constants Part A Polymer Chemistry

Preparation and Characterization of High Char Yield Polybenzoxazine/polyarylacetylene Blends for Resin‐transfer Molding

Polycondensations Kinetics of Poly(p-phenylenebenzobisoxazole)

Tailoring thermosetting benzoxazoles for optimal performance: Balancing thermal stability, dielectric properties, and processability

The Preparation and Characterization of Polybenzoxazole Copolymerized with Multiwalled Carbon Nanotube via Direct Friedel-Crafts Acylation

Study for the structure and curing behavior of polybenzoxazine precursor

Preparation of Poly(P-Phenylenbenzobisoxazole) Polymerization by 4,6-Diamino-1,3-Benzenediol/Terephthalate(TA Salt)

Synthesis and Characterization of Polybenzobisoxazole Polymers Containing Trifluoromethyl or Sulfone Groups

Synthesis and Properties of Poly[P-(2,5-Dihydroxy)-Phenylenebenzobisoxazole] Fiber

Synthesis, characterization, and thermal properties of benzoxazine monomers containing allyl groups

Novel Synthesis of High‐molecular‐weight Prepolymer of Poly(p‐phenylene Benzoxazole) in Ionic Liquids

Thermally rearranged polybenzoxazoles membranes with biphenyl moieties: Monomer isomeric effect

Synthesis and Optical Properties of Novel Conjugated Rigid-Rod Polymer Derived from Fluorene and Benzobisoxazole

Polybenzoxazine containing polysilsesquioxane: Preparation and thermal properties

Hydrogen-Bond- and Shear-Field-Induced Self-Assembly for the Efficient Preparation of Polybenzoxazole Nanofibers with Excellent Mechanical Properties and Heat Resistance

Curing behaviour and properties of a novel benzoxazine resin via catalysis of 2-phenyl-1,3,2-benzodioxaborole