Abstract:Ultra-low-wear polyethylene (ULWPE) is a new metallocene catalyzed high density polyethylene (HDPE)material. Previous studies have demonstrated that it has excellent biocompatibility and wear resistance, whereupon indicating great potential in the applications to artificial joints. However, as a newly developed material, its tribological behavior and wear resistance mechanism has not been well understood. In the current study, we experimentally evaluated the tribological behavior of ULWPE, and investigated its high wear resistance mechanism in terms of microstructure, crystallization properties, mechanical, physical, and chemical properties. ULWPE manifested the best tribological performance on pin-on-disc (POD) wear tests compared with the most widely used artificial joints materials, with a wear volume of 0.720 ± 0.032 mm3/million cycles (Mc) and 0.600 ± 0.027 mm3/Mc against cobalt-chromium (CoCr) alloy disc and zirconia toughened alumina (ZTA) ceramic disc, respectively. The results of the wear morphology analysis showed that the surface of ULWPE was the slightest, with no obvious surface damage, debris shedding and wear pits. We reveal that three major factors mainly contributed to its high wear resistance. First, ULWPE demonstrated a high crystallinity and a compact crystalline morphology comprised of long linear molecular chains, which contributed to its good mechanical performance. As confirmed by the mechanical test, ULWPE had a very high density, hardness, and tensile elongation at break. The high hardness and strength laid a solid foundation to a low wear volume, and its high ductility and hardness helped to endure abrasive and adhesive wear, resulting in excellent wear resistance. Second, the results of wettability analysis showed that the contact angle formed on the surface of ULWPE was the lowest and the surface energy was the highest. The hydrophilicity of ULWPE provided good lubrication conditions in body fluid. Third, it also had a lower oxidation index. The high hardness, high strength, high ductility and good wetting of ULWPE materials reduced the damage of the material to adhesion and abrasive wear, resulting in excellent wear resistance.

Friction and Wear Properties of Ultra-High Molecular Mass Polyethylene Reinforced with Al2o3 Nano-Particle

Tribological properties of kaolin filled UHMWPE composites in unlubricated sliding

A study on friction and wear characteristics of nanometer Al2O3 /PEEK composites under the dry sliding condition

Improved Tribological Properties of Poly(methyl methacrylate) Based Composites by the Synergistic Effect of Incorporating Ultra-High Molecular Weight Polyethylene and Heat Treatment

Biotribological Behavior of Ultra High Molecular Weight Polyethylene Composites Filled with Nano-ZrO2

AFM Analysis of Micro-Wear Mechanisms in Nano-Fe2o3 Particle Reinforced UHMWPE Composite

Biotribological properties of UHMWPE grafted with AA under lubrication as artificial joint

Tribological Properties of Self-Reinforced Ultra-High Molecular Weight Polyethylene Composites

Tribological and mechanical behaviors of Fe3O4NPs reinforced UHMWPE biocomposite

Abrasive wear behavior of particle reinforced ultrahigh molecular weight polyethylene composites

Investigating the effect of simultaneous incorporation of Al2O3 and B4C nanofillers in enhancing the wear performance of UHMWPE

Biotribology Behavior of Ultra-High Molecular Weight Polyethylene Against Carbon/Carbon Composites Used for Hip Joint Replacement

Study on the friction and wear behavior of peek composites filled with nanometer compounds and PTFE

Comparison Of Tribological Performances Of High Density Polyethylene Enhanced With Carbon Nanofibers

Study on Biocompatibility, Tribological Property and Wear Debris Characterization of Ultra-Low-wear Polyethylene As Artificial Joint Materials.

Tribological Properties of Ion Implanted UHMWPE Against Si3N4 under Different Lubrication Conditions

Structural and tribological characteristics of ultra-low-wear polyethylene as artificial joint materials

Tribological Behavior of Inorganic Nano-Particulates and Polytetrafluoroethylene Filled Polyetheretherketone Composites

Wear Mechanism and Wear Debris Characterization of ULWPE in Multidirectional Motion

Effect of Self-Lubricating Carbon Materials on the Tribological Performance of Ultra-High-Molecular-Weight Polyethylene

Ti3C2Tx‐UHMWPE Nanocomposites—Towards an Enhanced Wear‐Resistance of Biomedical Implants