Study on Sepiolite/Epoxy Nano-Composites

郑亚萍,张国彬,张文云,张爱波

DOI: https://doi.org/10.3969/j.issn.1000-2758.2004.05.017

2004-01-01

Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University

Abstract:We first prepared nanocomposites with sepiolite, epoxy CYD-128 and curing agents. Then we studied the impact strength, bend strength and transition glass temperature (Tg) of sepiolite/epoxy nanocomposites with the sepiolite content varying from 1% to 4% by mass, and then studied the effect of amount of sepiolite content on gel time of matrix. The fracture morphology of the impact specimens is observed by scanning electron microscopy, and the sepiolite dispersion and crystal structure are observed with X-ray diffraction. As a result, when sepiolite is installed, Tg will increase by about 50°C. The bend strength increases from 63.57 MPa up to 125.71 MPa with the addition of only 1 wt% of sepiolite, representing an improvement of up to 200% as compared with the neat epoxy. The impact strength increases from 4.1 kJ/m2 up to 20.92 kJ/m2 with the addition of only 1 wt% of sepiolite, showing an improvement of about 500% as compared with the neat epoxy. Sepiolite is dispersed well in epoxy matrix as fiber state, so it enhances the thermal and mechanical properties of epoxy matrix.