Abstract:Fused silica is widely used in aerospace and precision integrated micro-optical sensors due to its high hardness, low coefficient of thermal expansion, high transmittance properties and high chemical stability in harsh environments. Due to the amorphous characteristics, fused silica wet etching is isotropic and cannot realize specific structural functional devices; dry etching process is complex, costly, and relatively low productivity. These characteristics make the processing of fused silica extremely difficult, with high cost and low yield. Femtosecond laser processing has been widely used in the processing of complex and fine three-dimensional structure of fused silica due to its wide adaptability of materials, high degree of processing fineness and non-mask processing technology, but the surface of the processed surface is relatively rough. Fine micro-optical devices can be realized by wet-assisted femtosecond laser processing. In this study, microstructural patterns were fabricated on fused silica using a tightly focused femtosecond laser by means of a self-developed ultrafast laser processing instrumentation. By controlling the laser processing parameters and the etching time of HF solution to realize the precise modulation of linewidth, period and height of the grating, one/two dimensional gratings, and the Fresnel zone plates with circular and elliptical focal points and the biomimetic compound eye microlens array were successfully fabricated. Finally, the performance of the fabricated optical components were characterized, which were comparable to theoretical simulation values. The results show that the total diffraction efficiency of the fused silica gratings fabricated using this method reaches 85.5%; the Fresnel zone plates and the bionic compound eye microlens array have good focusing effects. This study provides a reference method for the fine micromachining of hard materials such as fused silica, and provides a theoretical basis for its engineering application.

Microfabrication of Optical Elements with Femtosecond Ti: Sapphire Laser Oscillator

Microfabrication of Optical Elements with Femtosecond Ti:sapphire Laser Oscillator

Fabrication of Optical Elements with Femtosecond Doubled-Frequency Ti:sapphire Laser

Fabrication of high-Q microresonators in dielectric materials using a femtosecond laser: Principle and applications

Fabrication of Microoptical Elements with Femtosecond Laser

Fabrication of Optical Cavities with Femtosecond Laser Pulses

Femtosecond Laser Direct Writing of High-Q Microresonators in Glass and Crystals

Fabrication of micro-optical components by using a femtosecond laser

Micro-Fabrication By Femtosecond Laser Pulses

Fabrication of Infrared Micro-Optical Components Using Femtosecond Laser

Application of Micro-Optical Components Fabricated with Femtosecond Laser

Rapid Fabrication of Smooth Micro-Optical Components on Glass by Etching-Assisted Femtosecond Laser Modification

Microfabrication by Femtosecond Laser Irradiation

Femtosecond laser microfabrication of micro-optic elements in glass

Fabrication of High Temperature Resistant Geometric Phase Element Inside Sapphire by Femtoesecond Laser

Fabrication of Photonic Devices Inside Glasses by High Repetition Rate Femtosecond Lasers

Femtosecond Laser Precision Engineering: From Micron, Submicron, to Nanoscale

Sub-diffraction-limit fabrication of sapphire by femtosecond laser direct writing

High Precision Femtosecond Laser Prototyping of Micro-Optical Components

Research of Femtosecond Laser-Assisted Etching of Fused Silica Micro-Optics Devices

Femtosecond laser micromachining optical devices