Abstract:To investigate the seismic performance of squat reinforced concrete (RC) walls with embedded cold formed and thin walled (CFTW) steel truss, experimental and analytical studies were conducted. Four one-third scaled composite wall specimens were tested to failure subjected to cyclic load reversals under constant axial load. The experimental behaviors of test specimens including damage development process, load-deformation responses, stiffness degradation, energy dissipation capacity, failure pattern and ductility were discussed. Test results indicate that the embedded CFTW steel truss web braces can effectively avoid web concrete crushing and improve the energy dissipation capacity of shear walls with low aspect ratios, resulting in a more ductile failure pattern due to the failure of boundary elements. Nonlinear finite element analysis (FEA) on test specimens was carried out based on suggested modeling techniques and the accuracy of the numerical method was verified. Influences of critical parameters such as axial load ratio, amounts of embedded CFTW steel truss chord and web braces on the performance of the composite shear walls were further examined through comprehensive parametric analysis. It shows that the axial load ratio has a significant impact on the post-yielding behavior of composite shear walls. Good displacement ductility can be achieved under medium level of axial load ratio. Increasing the amount of embedded truss chord cannot significantly improve the performance of composite walls. The embedded truss web braces are noticeably beneficial to the energy dissipation capacity and ductility behavior of squat composite walls. (C) 2016 Elsevier Ltd. All rights reserved.

Seismic Analysis of Shear Wall with Energy Dissipation Components by Using Nonlinear Finite Element Method

Seismic Behavior of Composite Shear Walls Incorporating Concrete-Filled Steel and FRP Tubes As Boundary Elements

A SIMPLIFIED ANALYTICAL PROCEDURE FOR SEISMIC ANALYSIS OF TIMBER LIGHT-FRAME SHEAR WALLS

Experimental study and numerical simulation of seismic performance of stiffened thin steel plate shear walls considering the effect of vertical load on frame column

Seismic Performance of Reinforced Concrete Squat Walls with Embedded Cold-Formed and Thin Walled Steel Truss

Analysis on Reinforce Concrete Sandwich Wall-Panel Using Nonlinear Finite Element Method

Experimental study and FEM analysis on seismic behavior of a three-storied structural wall

Experimental study and finite element analysis of seismic behavior of sprayed concrete sandwich shear walls

Numerical Simulation and Shear Capacity Study of a New Double-Steel-Plate Shear Wall

Seismic Analysis and Design of Composite Shear Wall with Stiffened Steel Plate and Infilled Concrete

Seismic behavior of prefabricated concrete filled steel tube-bordered monolayer reinforced shear wall

Study and Numerical Analysis on Seismic Performance of Concrete U-Shaped Shear Wall

Seismic Performance of Composite Low-rise Shear Wall with Concrete-filled Round Steel Tube Columns and Concealed Steel Trusses

Nonlinear FEM Analysis on RC Structural Wall with Large Eccentric Openings

Nonlinear finite element analysis of prefabricated hollow-core reinforced concrete shear walls

Finite Element Simulative Test of L-shaped Shot-leg Shear Wall

Finite element analysis of rectangular and flanged steel‐concrete shear walls under cyclic loading

Experimental Research on Seismic Behavior of Low Shear-Span Ratio Composite Shear Wall with Double Steel Plates and Infill Concrete

Seismic behavior research of composite shear wall with concrete filled steel tube columns for different axial-load ratios

Study on energy dissipation mechanism control in energy-based seismic design method of reinforced concrete frame-shear-wall structure

Study on energy demand determination and design procedure in energy-based seismic design method of reinforced concrete frame-shear-wall structure