Abstract:INTRODUCTION Ammonium-rich wastewaters are produced normally from the food processing, agricultural industries. Therefore, nitrogen pollution has become the attractive problem of scientists in recently. The current method of removal of ammonium in wastewater treatment plants consists of a combination of aerobic nitrification catalyzed by autotrophic nitrifiers and anoxic denitrification catalyzed by heterotrophic denitrifiers. In the nitrification process, ammonium is oxidized to nitrate via nitrite, and nitrate is reduced with organic carbon via nitrite to N2 in denitrification process. This combination was considered as the only economical way to remove ammonium from wastewater. However, more economical considerations using shortcuts in the nitrification-denitrification process, i.e., Anaerobic Ammonium Oxidation (Anammox), was attracted much attentions. When the Anammox process is combined with the nitritation step, the remaining ammonium and the converted nitrite from nitritation will be oxidized to yield nitrogen gas under anoxic conditions with nitrite as the electron acceptor. This autotrophic process allows over 50% saving of the oxygen and no organic carbon supplementation for denitrification. In addition, the biomass yield is very low for Anammox bacteria, so that little sludge is produced in Anammox process. The stoichiometry of the Anammox reaction was determined as follows: NH4 + 1.32 NO2 + 0.066 HCO3 + 0.13H → 1.02 N2 + 0.26 NO3 + 0.066 CH2O0.5N0.15 + 2.03 H2O In this research, PVA gel beads was selected as biomass carriers for Anammox sludge and applied for fluidized bed reactor. The objectives of this research were to evaluate the ammonium removal capabilities of Anammox sludge in fluidized bed reactor using PVA gel beads.

Comparison of Microbial Activity of Activated Sludge Immobilized in Polyvinyl Alcohol Gel by Various Reagents

Immobilization of activated sludge using improved polyvinyl alcohol (PVA) gel

Immobilization of Activated Sludge in PVA Matrix Using Innovative Methods

Characterization and Comparison of Anammox Immobilization in Polyvinyl Alcohol, Polyethylene Glycol and Water-Borne Polyurethane

Immobilization of microorganisms with phosphorylated polyvinyl alcohol (PVA) gel

The influence of poly-vinyl-alcohol (PVA) characteristics on the physical stability of encapsulated immobilization media for advanced wastewater treatment

Nitrogen removal performance and characteristics of gel beads immobilized anammox bacteria under different PVA:SA ratios

Toughening of Polyvinyl Alcohol Hydrogel Through Co-Crosslinking and its Wastewater Treatment Performance by Immobilizing with Microorganism

Study on physical and chemical characteristics of microorganism immobilized media for advanced wastewater treatment

Comparative study on polyvinyl alcohol and alginate for cell immobilization in biosorption

Comparison of Di-n-methyl Phthalate Biodegradation by Free and Immobilized Microbial Cells

Immobilization of Microbial Cells Using Polyvinyl Alcohol (PVA) — Polyacrylamide Gels

Investigating the effect of electrosprayed alginate/PVA beads size on the microbial growth kinetics: Phenol biodegradation through immobilized activated sludge

Enhanced fermentative hydrogen production using gamma irradiated sludge immobilized in polyvinyl alcohol (pva) gels

Anammox sludge immobilized in polyvinyl alcohol (PVA) cryogel carriers

Co-immobilization of Pseudomonas stutzeri YHA-13 and Alcaligenes sp. ZGED-12 with polyvinyl alcohol–alginate for removal of nitrogen and phosphorus from synthetic wastewater

Statistical optimization of immobilization of activated sludge in PVA/alginate cryogel beads using response surface methodology for p-nitrophenol biodegradation

Antifouling Characteristics of Sugar Immobilized Polypropylene Microporous Membrane by Activated Sludge and Bovine Serum Albumin

Effect of trace amounts of polyacrylamide (PAM) on long-term performance of activated sludge

[Environmental Factors Influence and Microbial Community Structure Analysis of Entrapped Anaerobic Ammonium Oxidizing Bacteria]

NITROGEN REMOVAL USING ATTACHED IMMOBILIZED ANAMMOX SLUDGE ON PVA GEL BEADS