Abstract:Using high-strength (HS) materials in steel–concrete composite beams is an efficient approach to reduce the self-weight and to improve the sustainability benefits of such members. Due to a lack of precise knowledge of the ductility of composite beams beyond their first yield as a result of the non-linear response of their constituent materials, a comprehensive investigation is reported herein to quantify the available rotation capacity of composite beams using HS materials when subjected to sagging bending. An advanced three-dimensional finite element model is utilised to calculate the end rotation of single-point-loaded simply-supported composite beams. The model has demonstrated to be adequate and reliable in terms of predicting the flexural strength and load–deflection response by comparisons with numerous experimental results reported elsewhere. As many as 1380 beams with various strengths of steel and concrete as well as a wide range of the degree of shear connection and geometries are modelled, and both solid slabs and composite slabs using profiled steel decking are incorporated. Analyses of this body of data indicate that the depth of the neutral axis is the most essential parameter for determining the available sagging rotation capacity, of which an increased value leads to a lower rotation capacity. The yield strength of the steel also has noticeable effects with higher values resulting in poorer rotation performance. The available rotation capacity is also sensitive to the span-to-depth ratio of the beams. In addition, the effects of varying cross-sectional geometries, different patterns of shear connector distributions as well as of geometric imperfections and residual stresses are clarified, which are shown to be slight and can therefore be ignored. Finally, a non-linear empirical equation is developed to predict the available rotation capacity of composite beams using HS materials, which covers the range of numerical data with satisfactory consistency. The outcomes provide an important basis for evaluating the ductility of composite beams by comparing with the required rotation capacity.

Loading Capacity of Composite Slim Beam in the Sagging Moment Region

Loading Capacity of Simply Supported Steel-Concrete Composite Slim Beams

Composite Shear Behavior of Steel-Concrete Composite Beams under Sagging Moment

Loading capacity of composite slim frame beams

Loading Capacity of Simply Supported Composite Slim Beam with Deep Deck

Bending Stiffness of Steel-Concrete Composite Beams Considering Effect of Slip

RESEARCH ON FLEXURAL PERFORMANCE OF DOUBLE-STEEL REINFORCED CONCRETE BEAM

Influencing factors to flexural loading capacity of composite slim beam with deep deck in the hogging moment region

Reduced Stiffness of Composite Beams Considering Slip and Shear Deformation of Steel

Finite Element Analysis on Structural Behavior of Steel-Concrete Composite Slim Beams

Structural behavior of steel-concrete composite slim beam in the negative moment region

Finite Element Analysis on Flexural Loading Capacity of Composite Slim Beam with Deep Deck in the Hogging Moment Region

STUDY ON LOAD BEARING CAPACITY AND ENGINEERING APPLICATION OF STEEL-CONCRETE SLIM BEAM

Experimental study of an innovative steel-concrete composite beam under hogging moment

Nonlinear Finite Element Analysis on Flexural Loading Capacity of Composite Slim Beam with Deep Deck

Available rotation capacity of composite beams with high-strength materials under sagging moment

Pseudo-static loading test on a full-scale two-storey composite slim floor

Experimental Study of Innovative Steel-Concrete Composite Beams under Hogging Moment

Experimental Study on Flexural Behavior of Frame Composite Slim Beam with Deep Deck

Vertical shear strength of composite beams with compact steel sections. Part Ⅰ: Composite beams subjected to sagging moment

FEA of the Loading Capacity of Monolithic Composite Slim Floors with Deep Decks