Abstract:An automated and continuous sample introduction system for microfluidic chip-based capillary electrophoresis (CE) was developed in this work. An efficient world-to-chip interface for chip-based CE separation was produced by horizontally connecting a Z-shaped fused silica capillary sampling probe to the sample loading channel of a crossed-channel chip. The sample presentation system was composed of an array of bottom-slotted sample vials filled alternately with samples and working electrolyte, horizontally positioned on a programmable linearly moving platform. On moving the array from one vial to the next, and scanning the probe, which was fixed with a platinum electrode on its tip, through the slots of the vials, a series of samples, each followed by a flow of working electrolyte was continuously introduced electrokinetically from the off-chip vials into the sample loading channel of the chip. The performance of the system was demonstrated in the separation and determination of FITC-labeled arginine and phenylalanine with LIF detection, by continuously introducing a train of different samples. Employing 4.5 kV sampling voltage (1000 V cm(-1) field strength) for 30 s and 1.8 kV separation voltage (400 V cm(-1) field strength) for 70 s, throughputs of 36 h(-1) were achieved with <1.0% carryover and 4.6, 3.2 and 4.0% RSD for arginine, FITC and phenylalanine, respectively (n = 11). Net sample consumption was only 240 nL for each sample.

Design and Experiment Research of Integrated Capillary Electrophoresis Chip

Development of integrated capillary electrophoresis chips]

The Research of the Laser Induced Fluorescence Detection on the Integrated Capillary Electrophoresis Chip

Optimization of Laser Induced Fluorescence Detection System for Integrated Capillary Electrophoresis Chip

Optimized Design about Microchannel Shape of Sample Injection on Microchip Electrophoresis

Microfabrication of Integrated Capillary Electrophoresis Chips and On-chip Sample Injection and Separation

A Chip-based Capillary Electrophoresis System for High-efficiency Bioanalysis

Study of microfabrication of capillary electrophoresis chip

Investigation of a Microfluidic Free-Flow Electrophoresis Chip of Glass Substrate with Integrated Indium Tin Oxide Electrodes

Development Of Integrated Capillary Electrophoresis Chips Technology

An Automated Electrokinetic Continuous Sample Introduction System for Microfluidic Chip-Based Capillary Electrophoresis

Design And Fabrication Of Low Voltage Integrated Electrophoresis Chip

Progress on Computer Assisted Electrophoresis Microchip Design

The Optimization of Electrophoresis on a Glass Microfluidic Chip and its Application in Forensic Science

Development of Intelligent Multifunctional Capillary Electrochromatography System

Microfluidic Analysis System Based On Capillary Electrophoresis Chip

Simulation of the ICEC Signal and its Component

Experimental Study on the Hot Embossing Polymer Microfluidic Chip

Class Chips For Capillary Electrophoresis: Micromachining, Sample Injection And Separation

Study of Capillary Electrophoresis Chip with Conductivity Detection

Development Of Integrated Microfluidic Chip-Based Bioanalyzer With Laser-Induced Fluorescence Detection