Abstract:The rapid development of the next-generation high-speed wireless communication system has set increasingly stringent requirements on the spectral purity of local RF oscillators. Low phase noise is crucial to support advanced modulation scheme enabling high data-rates wireless link [1]. A viable popular approach is to coupled N identical oscillators together to improve the phase noise by 10log <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">10</inf> N at the cost of N times higher power [2]–[6]. Nevertheless, the coupling network needs to be designed carefully to avoid undesired multi-tone concurrent oscillations. Besides, area occupation is another issue of multi-core VCOs. The star-geometry as shown in Fig. 1. (bottom left), which is simple N times duplication of single core, occupies N times larger area so comes with an area penalty [3]–[5]. To solve this problem, circular geometry is proposed where the passives are merged into a single passive structure and the minimal realizable inductance is reduced while keeping a high Q factor [6]–[7]. In order to further reduce the silicon area, a square-geometry quad-core oscillator with inductor sharing technique is proposed in this paper and it exhibits a compact area of 0.09 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> , which is the smallest quad-core VCO operating at a similar oscillation frequency. The unwanted mode is suppressed by the metal trace that connects the drain node of adjacent cores. Thanks to the proposed square-geometry and inductor sharing technique, the proposed quad-core class-F VCO can further reduce the area occupation. The proposed VCO is fabricated in 65nm CMOS technology. The measured phase noise is -137.2 dB/Hz at 10 MHz offset frequency from a carrier of 19 GHz, which translates to the FoM of 186.1 dBc/Hz.

A 4.8GHz CMOS fully-integrated LC balanced oscillator with symmetry noise filtering technique

4.8 GHz CMOS fully integrated LC balanced oscillator with symmetrical noise filter technique and large tuning range

A 418 GHz CMOS Fully Integrated LC Balanced Oscillator with Symmetrical Noise Filter Technique and Large Tuning Range

An Improved Low Phase Noise LC-VCO with Wide Frequency Tuning Range Used in CPPLL

A 4.4-Ghz 193.2-Db FoM 8-Shaped-inductor Based LC-VCO Using Orthogonal-Coupled Triple-Coil Transformer

A 4.89-Ghz Low-Phase-noise VCO in CMOS Technology

An Enhanced 4.8-Ghz Fully Integrated NMOS LC VCO for Wireless LAN Application

A Compact Square-Geometry Quad-Core 19 GHz Class-F VCO with Parallel Inductor-sharing Technique achieving -137.2 dBc/Hz Phase Noise at 10MHz Offset

An Ultra-Low-Voltage High-Performance VCO in 0.13 μm CMOS

A 4.2-5 GHz, Low Phase Noise LC-VCO with Constant Bandwidth and Small Tuning Gain

A 3 GHz Low Power LC VCO with Voltage Boosted Circuit from 0.5 V Supply

A 5-8 GHz Wideband and Low Phase Noise Cross-Coupled LC VCO Using 6-bit DCCA in 40nm CMOS Process

The Design of a 2.82～4.04 GHz CMOS Differential Tuned LC VCO

A FoM of −191 Db, 4.4-Ghz LC-VCO Integrating an 8-Shaped Inductor with an Orthogonal-Coupled Tail-Filtering Inductor

A 2ghz Low Power Differentially Tuned CMOS Monolithic LC-VCO

A broadband CMOS LC voltage-controlled oscillator for FMCW synthesizer

A 6 GHz Wideband Low-phase-noise CMOS LC VCO

A 4.8-6.8Ghz Low Phase Noise LC VCO in 0.13-Μm CMOS Technology

A 2.34–3.29GHz CMOS LC VCO with low phase noise and low power

A Class-C Eight-Phase Voltage-Controlled Oscillator With 184.2 dBc/Hz FoM and Loop-Based Superharmonic Coupling in 65nm CMOS

A 4.9–6.9 GHz LC VCO with low-phase-noise