Abstract:Introduction. The control algorithm of Induction Motor (IM) is massively dependent on its parameters; so, any variation in these parameters (especially in rotor resistance) gives unavoidably error propagates. To avoid this problem, researches give more than solution, they have proposed Variable Structure Control (VSC), adaptive observers such as Model Reference Adaptive System, Extended Luenberger Observer (ELO) and the Extended Kalman Filter (EKF), these solutions reduce the estimated errors in flux and speed. As novelty in this paper, the model speed observer uses the estimated currents and voltages as state variables; we develop this one by an error feedback corrector. The Indirect Rotor Field Oriented Control (IRFOC) uses the correct observed value of speed; in our research, we improve the observer’s labour by using back-stepping Sliding Mode (SM) control. Purpose. To generate the pulse-width modulation inverter pulses which reduce the error due of parameters variations in very fast way. Methods. We develop for reach this goal an exploration of two different linear observers used for a high performance VSC IM drive that is robust against speed and load torque variations. Firstly, we present a three levels inverter chosen to supply the IM; we present its modelling and method of control, ending by an experiment platform to show its output signal. A block diagram of IRFOC was presented; we analyse with mathematic equations the deferent stages of modelling, showed clearly the decoupling theory and the sensorless technique of control. The study described two kinds of observers, ELO and EKF, to estimate IM speed and torque. By the next of that, we optimize the step response using the fuzzy logic, which helps the system to generate the PI controller gains. Both of the two observers are forward by SM current controller, the convergence of SM-ELO and SM-EKF structures is guaranteed by minimizing the error between actual and observed currents to zero. Results. Several results are given to show the effectiveness of proposed schemes.

Backstepping Design for Robust Controller of Induction Motor

Backstepping Robust Adaptive Control for an Electro-Hydraulic Servo System

Controller design for a class of nonlinear uncertain systems

Adaptive Robust Sensorless Control for PMSM Based on Improved Back EMF Observer and Extended State Observer

An Adaptive Observer Design for Sensorless Control of Induction Motors

Excitation Controller Design for Power System Based on New Back-stepping Method

Adaptive Robust Control of a Class of Motor Servo System with Dead Zone Based on Neural Network and Extended State Observer.

Design of a Robust Controller for Induction Motor Drive Systems Based on Extendable Fuzzy Theory

Adaptive Backstepping Speed Control for IPMSM with Uncertain Parameters

Intelligent fuzzy back-stepping observer design based induction motor robust nonlinear sensorless control

Backstepping Control of Speed for Sensorless Permanent Magnet Synchronous Motor

Model reference adaptive backstepping control of double star induction machine with extended Kalman sensorless control

Robust backstepping control for attitude tracking of a quadrotor based on integral linear extended state observer under input saturation

A New Robust Algorithm to Improve the Dynamic Performance on the Speed Control of Induction Motor Drive

Active Disturbance Rejection and Adaptive Backstepping Control for Induction Motor with Smooth Switching of Rotor Flux

Backstepping sliding mode control of induction motor based on disturbance observer

DSP-based adaptive backstepping using the tracking errors for high-performance sensorless speed control of induction motor drive

A Robust Nonlinear Controller for Induction Motor

Robustification of Backstepping Design Technique: A Jet Engine Compressor Model Example

Hybrid Backstepping-Super Twisting Algorithm for Robust Speed Control of a Three-Phase Induction Motor

A Novel Robust Adaptive Backstepping Method Combined with SMC on Strict-Feedback Nonlinear Systems Using Neural Networks