Abstract:Introduction. The control algorithm of Induction Motor (IM) is massively dependent on its parameters; so, any variation in these parameters (especially in rotor resistance) gives unavoidably error propagates. To avoid this problem, researches give more than solution, they have proposed Variable Structure Control (VSC), adaptive observers such as Model Reference Adaptive System, Extended Luenberger Observer (ELO) and the Extended Kalman Filter (EKF), these solutions reduce the estimated errors in flux and speed. As novelty in this paper, the model speed observer uses the estimated currents and voltages as state variables; we develop this one by an error feedback corrector. The Indirect Rotor Field Oriented Control (IRFOC) uses the correct observed value of speed; in our research, we improve the observer’s labour by using back-stepping Sliding Mode (SM) control. Purpose. To generate the pulse-width modulation inverter pulses which reduce the error due of parameters variations in very fast way. Methods. We develop for reach this goal an exploration of two different linear observers used for a high performance VSC IM drive that is robust against speed and load torque variations. Firstly, we present a three levels inverter chosen to supply the IM; we present its modelling and method of control, ending by an experiment platform to show its output signal. A block diagram of IRFOC was presented; we analyse with mathematic equations the deferent stages of modelling, showed clearly the decoupling theory and the sensorless technique of control. The study described two kinds of observers, ELO and EKF, to estimate IM speed and torque. By the next of that, we optimize the step response using the fuzzy logic, which helps the system to generate the PI controller gains. Both of the two observers are forward by SM current controller, the convergence of SM-ELO and SM-EKF structures is guaranteed by minimizing the error between actual and observed currents to zero. Results. Several results are given to show the effectiveness of proposed schemes.

DSP-based adaptive backstepping using the tracking errors for high-performance sensorless speed control of induction motor drive

Adaptive Sliding Mode Sensorless Vector Control of Induction Motor Using Sliding Mode MRAS Observer

Adaptive Robust Sensorless Control for PMSM Based on Improved Back EMF Observer and Extended State Observer

Speed Sensorless Nonlinear Control Of Pmsm Drives

Backstepping Control of Speed for Sensorless Permanent Magnet Synchronous Motor

Speed Control For A Permanent Magnet Synchronous Motor With An Adaptive Self-Tuning Uncertainties Observer

SPEED TRACKING CONTROL OF PERMANENT MAGNET SYNCHRONOUS MOTOR WITH BACKSTEPPING

Adaptive Backstepping Speed Control for IPMSM with Uncertain Parameters

Intelligent fuzzy back-stepping observer design based induction motor robust nonlinear sensorless control

Model reference adaptive backstepping control of double star induction machine with extended Kalman sensorless control

Nonlinear Speed Sensorless Control Of Pmsm Drives

Design and Implementation of Adaptive Backstepping Speed Control for Permanent Magnet Synchronous Motor

Integrated Design of Speed Sensorless Control Algorithms for Induction Motors

A Robust Backstepping Sensorless Control for Interior Permanent Magnet Synchronous Motor Using a Super‐Twisting Based Torque Observer

Speed Sensorless Vector Control Based on Full-order Adaptive Observer for Induction Motor Drives at Low Speed

Position Sensor-less and Adaptive Speed Design for Controlling Brush-less DC Motor Drives

Sensorless Speed Control for SPMSM Using a Nonlinear Observer and Enhanced Super-Twisting ADRC

Adaptive Observer for Sensorless Control of Permanent Magnet Synchronous Motor Drives

A Terminal Sliding Mode Observer Based Robust Backstepping Sensorless Speed Control for Interior Permanent Magnet Synchronous Motor