Abstract:Task-constrained motion planning (TCMP) is involved in many practical applications, such as opening the door, opening the drawer, twisting the screw, and so on. Because of the trend of man-machine collaboration and the existence of dynamic in environments, planning the collision-free motions for task-constrained manipulation is a significative problem. This paper explores the TCMP issue for mobile manipulation, which uses a mobile base to enhance the working range and flexibility but simultaneously makes the problem harder than that of single manipulation because of the additional degrees of freedom (dofs). We propose an optimization-based method to plan the obstacle avoidance motion in real-time. First, the global robotic Jacobian matrix that combines the omnidirectional base and the robotic arm is derived. Second, model predictive control is used to plan the control rule in order to maximize the closest distance between the obstacles and the mobile manipulator and minimize the velocities of null space at the same time. We have deduced the model with four differential equations that represent the law of the distance over time. Third, the distances are calculated and sent to the model to calculate the velocity of each joint of the arm and the base using ACADO that is an open-source toolkit. Using the velocities, the mobile manipulator can move away from the approaching people while still fixing the end of the arm to manipulate tool at the same time. Our method is verified on the mobile manipulator that consists of four Mecanum wheels, a base, a UR10 arm, and four kinect cameras in Gazebo simulation with using the ROS operation.

Fault tolerant planning with avoidance of joint torque limit for redundant manipulators

Adaptive Robust Posture Control of A Pneumatic Muscles Driven Parallel Manipulator with Redundancy

Moving Obstacle Avoidance for Redundant Manipulator Via Weighted Least Norm Method

Dynamical Obstacle Avoidance of Task- Constrained Mobile Manipulation Using Model Predictive Control

Torque Limitation Control of Industrial Manipulators Based on General Weighted Least Norm Method

Torque limit constrained control of redundant manipulator based on GWLN method

Kinematic Analysis and Fault-Tolerant Trajectory Planning of Space Manipulator under a Single Joint Failure

On-Line Fault-Tolerant Fuzzy-Based Path Planning and Obstacles Avoidance Approach for Manipulator Robots

Detachment avoidance of joint elements of a robotic manipulator with clearances based on trajectory planning

Trajectory Planning of Large Redundant Manipulator Considering Kinematic Constraints and Energy Efficiency

Neural Dynamic Fault-Tolerant Scheme for Collaborative Motion Planning of Dual-Redundant Robot Manipulators.

A Discrete Model-Free Scheme for Fault Tolerant Tracking Control of Redundant Manipulators

Dynamic Formulation of a Planar 3-DOF Parallel Manipulator with Actuation Redundancy

Inverse kinematics and planning/control co-design method of redundant manipulator for precision operation: Design and experiments

Time-optimal and Jerk-continuous Trajectory Planning Algorithm for Manipulators

Kinematic and Dynamic Models of Hyper-Redundant Manipulator Based on Link Eigenvectors

Active Fault-Tolerant Control Integrated with Reinforcement Learning Application to Robotic Manipulator

Torque optimization method of a 3-DOF redundant parallel manipulator based on actuator torque range

Optimization-based Motion Planning of Mobile Manipulator with High Degree of Kinematic Redundancy

Multi-Layered Safety of Redundant Robot Manipulators via Task-Oriented Planning and Control