Abstract:The modeling of stator and rotor faults is the basis of the development of online monitoring techniques. To obtain reliable stator and rotor fault models, this paper focuses on dynamic modeling of the stator and rotor faults in real-time, which adopts a multiple-coupled-circuit method by using a winding function approach for inductance calculation. Firstly, the model of the induction machine with a healthy cage is introduced, where a rotor mesh that consists of a few rotor loops and an end ring loop is considered. Then, the stator inter-turn fault model is presented by adding an extra branch with short circuit resistance on the fault part of a stator phase winding. The broken rotor bar fault is then detailed by merging and removing the broken-bar-related loops. Finally, the discrete models under healthy and faulty conditions are developed by using the Tustin transformation for digital implementation. Moreover, the stator and rotor mutual inductances are derived as a function of the rotor position according to the turn and winding functions distribution. Simulations and experiments are performed on a 2.2-kW/380-V/50-Hz three-phase and four-pole induction motor to show the performance of the stator and rotor faults, where the saturation effect is considered in simulations by exploiting the measurements of a no load test. The simulation results are in close agreement with the experimental results. Furthermore, magnitudes of the characteristic frequencies of 2f1 in torque and (1 ± 2s)f1 in current are analyzed to evaluate the stator and rotor fault severity. Both indicate that the stator fault severity is related to the short circuit resistance. Further, the number of shorted turns and the number of continuous broken bars determines the rotor fault severity.

Nonlinear modeling and simulation of induction machine

Non-linear Modeling and Simulation of Induction Motor

Modeling and Simulation of Non-Linear Dynamic Process of the Induction Motor System with Fluctuating Potential Loads

A Nonlinear 3-D Hybrid Model for Surface-Mounted Permanent Magnet Machines Considering End Effect

Modeling and Evaluation of Stator and Rotor Faults for Induction Motors

Testing and Modeling of Losses in Induction Machines

A Novel Nonlinear Modeling Method for Permanent-Magnet Synchronous Motors

On-Load Field Prediction of Surface-Mounted PM Machines Considering Nonlinearity Based on Hybrid Field Model

Dynamic Modeling of Surface-Mounted Permanent Magnet Motors Considering Saturation

Analytical nonlinear model for permanent magnet synchronous machine incorporating saturation saliencies

Nonlinear Analytical Analysis of External Rotor Permanent Magnet Synchronous Motor

The Modeling of Induction Motor in Matlab/Simulink and Its Techno-Application

Nonlinear Semianalytical Model for Axial Flux Permanent-Magnet Machine.

Quasi-3-D Nonlinear Analytical Modeling of Magnetic Field in Axial-Flux Switched Reluctance Motors

Modeling and Simulation of Asynchronous Motor Including Iron Loss

Parameters and Performance Calculation of Induction Motor by Nonlinear Circuit-Coupled Finite Element Analysis

Nonlinear Magnetic Model of Surface Mounted PM Machines Incorporating Saturation Saliency

Advanced Mathematical Model For Surface Mounted Permanent Magnet Machines With Equivalent Virtual Salient Rotor

A High-Fidelity and Computationally Efficient Model for Interior Permanent-Magnet Machines Considering the Magnetic Saturation, Spatial Harmonics, and Iron Loss Effect

Nonlinear Magnetic Network Models for Flux-Switching Permanent Magnet Machines

Dynamic Modeling and Performance Analysis With Iron Saturation for Dual-Stator Brushless Doubly Fed Induction Generator