Abstract:Due to the great applications of ultrafast X-ray in detecting the micro-world, the X-ray sources develop rapidly. One of X-ray sources named Laser-Electron Xray Machine (LEXM) based on the Inverse Compton Scattering of optical cavity is very promising. Accelerator Lab of Tsinghua University has finished the basic prototype design. This paper compares the different kinds of X-ray source, such as SR, FEL, X-ray tubes and LEXM. And this paper optimizes the optical lengths of four mirrors structure optical cavity and analyses the mechanical stabilities of two mirrors and four mirrors structure optical cavity used for TTX. According to the simulation results, we choose the four mirrors structure optical cavity. INTRODUCTION X-ray diffraction and scattering, X-ray crystallography, and X-ray spectroscope are widely used in life science[1], material science[2], and medical diagnosis[3]. Highquality and high-brightness X-rays are a strong requirement to improve the applications. Scientists are making efforts to look for new X-ray sources. With the development of new technology, so far, X-ray source generators have X-ray tube, Synchrotron Radiation (SR), Free Electron Laser (FEL) and Laser-Electron X-ray Machine (LEXM). Figure 1 shows the history of X-ray sources. X-ray tubes are cheap and compact but not monochromatic. SR has a high X-ray flux and costs a lot because of tens of GeV electron storage ring. More than 70 synchrotrons in operation or under construction locate in more than 30 countries. Nowadays, FEL has got the highest brightness and intensity. However, due to the high cost, many fundamental and applied research organizations cannot afford an SR or a FEL. LEXM based on Inverse Compton Scattering can fill the gap between SR/FEL and X-ray tubes. LEXM has many advantages, such as compact instrumentation, low cost, good beam direction, acceptable luminosity and so on. Nevertheless, an LLEXM based on CPA (chirped pulse amplification), which has been in operation at Tsinghua University, produces the low-repetition-rate X-ray (tens of hertz). An H-LEXM with high-repetition-rate (several hundred MHz), which contains an electron ring and an optical enhancement cavity (OEC), will be constructed. 104-105 photons per collision and average flux of 1012-1013 photons per second can be reached.

Design of a Compact Laser Synchrotron Source and Its Applications

Dalian Extreme Ultraviolet Coherent Light Source

Design of A Source to Supply Ultra-Fast Electron and X-Ray Pulses

Design and Development of Laser-Rf Synchronization System for Thomson-scattering X-ray Source at Tsinghua University

A Recirculating Linac-Based Facility for Ultrafast X-Ray Science

Researches of Thomson scattering ultra-short pulse X-ray source at Tsinghua University

Lattice design and beam dynamics in a compact X-ray source based on Compton scattering

A simulation study of Tsinghua Thomson scattering X ray source

Towards a compact all optical terahertz-driven electron source at Tsinghua University

Design of a Compact Short Pulse Positron Source Based on Laser Plasma Accelerators

Development of Sub-100 Femtosecond Timing and Synchronization System.

A Palmtop Synchrotron-like Radiation Source

Calculation of Thomson Scattering of Intense Lasers from Electron Beams at Different Interaction Angles

Steady-state Micro-Bunching Accelerator Light Source

Generating 10~40MeV high quality monoenergetic electron beams using a 5TW 60fs laser at Tsinghua University

Preliminary Experiment Of The Thomson Scattering X-Ray Source At Tsinghua University

Progress of Compact Laser Plasma Accelerator in Peking University

Study of a Free-Electron Laser Driven by a Laser-Plasma Accelerated Beam at Peking University

The High-Brightness Ultra-Short Pulsed Electron Beam Source at Peking University

Progress on Developing A Pw Ultrashort Laser Facility with Ns, Ps and Fs Outputting Pulses

Mechanical stability analysis on optical cavity used for ttx*