Abstract:(1-x)Pb(Mg1/3Nb2/3)O-3 - xPbTiO(3) materials near the morphotropic phase boundary are selected for tentative electron emission experiments due to their excellent piezoelectric and ferroelectric properties and relatively high dielectric constants. The influences of ferroelectric and dielectric properties of ferroelectric cathode material on its threshold voltage are studied. The relationship between emission current and triggering voltage is investigated, and the relationship between emission current and extracting voltage is studied as well. The electron emission mechanism is also analyzed. The results show that emission threshold voltage of the relaxation ferroelectric 0.9Pb(Mg1/3Nb2/3)O-3 -0.1PbTiO(3) is smaller due to its high dielectric constant at room temperature and large polarization variation. Low threshold voltage means low power consumption. This is an important factor to be considered in actual application for ferroelectric cathode and it has an important reference value. Electron emission is associated with fast polarization reversal and the formation of the plasma. The self-emission current starts on the falling edge of the triggering voltage pulse, which means that it is caused by polarization reversal. The amplitude of the self-emission current grows exponentially with the increase of triggering voltage. The amplitude of emission current shows a linear growth with the increase of extracting voltage when it is larger. It indicates that large current is determined mainly by extracting voltage. Larger current needs larger extracting voltage. The emission current starts on the rising edge of the triggering voltage pulse. It is associated with the field enhancement effect near "three interface points" and the formation of the plasma. An emission current of 210 A is obtained from the ferroelectric cathode under an extracting voltage of 2500 V, and the corresponding current density is 447 A/cm(2).

Experimental Study of Lead-Free Ferroelecrtric Ceramics for Electron Emission

Experimental Study of the Electron Emission Mechanism of Ferroelectric Cathode Materials

Ferroelectric Cathode Material:BaTiO3-based Ceramics

Studies on the Electron Emission Properties of a Novel Lead Free Cathode

STUDY OF ELECTRON EMISSION INDUCED BY PHASE TRANSITION FROM LEAD FREE CATHODES

Study on the Characteristics of Ferroelectric Electron Emission

Electron Emission from Lead Lanthanum Zirconate Titanate Ferroelectric Cathodes

Enhanced electrocaloric effect in lead-free NBT-based ceramics

Enhancing Electrical Properties of High-Curie Temperature Piezoelectric Ceramics BNT-PZT and Their Mechanism

Experimental Investigation of Antiferroelectric Cold Cathode for Strong Electron Emission

Preparation and Characteristics of Ferroelectric Cathode

Technology of Ferroelectric Electron Emission

Study of Phase Transition Induced Electron Emission from NBT Based Ceramics

BiFeO3-BaTiO3: A New Generation of Lead-Free Electroceramics

Electron Emission from Pb0.88La0.08(Zr0.65Ti0.35)O3 Ferroelectric Ceramics

Electron Emission Characteristic Study of Cylindrical Ferroelectric Cathode

Electron Emission from Pb(Mg1/3nb2/3)O-3-Pbtio3 Ferroelectric Cathode

Enhanced electrical properties in lead-free NBT–BT ceramics by series ST substitution

Determination of the superstructure of lead free piezoelectric ceramics (BNT-BT-KNN)

Low electric field induced high energy storage capability of the free-lead relaxor ferroelectric 0.94Bi0.5Na0.5TiO3-0.06BaTiO3-based ceramics

Strong Electron Emission of Antiferroelectric Ceramic