Abstract:The structural strain field corresponds to the stress of each point and is an important unavoidable parameter in structural analysis or structural testing. The noncontact optical strain measurement methods are mainly divided into indirect strain measurement methods derived from displacement field differentiation and direct strain measurement methods represented by the digital shearing speckle pattern interferometry. The full-field displacement in the indirect measurement technique is commonly obtained using the electronic speckle pattern interferometry method, the digital image correlation method based on binocular camera or scanning laser doppler vibrometer method, and the differential operation further amplifies the measurement error. This study proposed a strain measurement method based on the defocused laser speckle pattern. In the case of defocus, the laser speckle field is sensitive to only the tilt angle, and the motion mode is the lateral translation of the same speckle field. The strain information can be obtained directly by the correlation calculation of laser speckle patterns before and after deformation. Experiments of the cantilever beam and bilateral clamped plate verified the effectiveness of the proposed method and proved that the proposed method made up for the limitations of the digital image correlation method and digital shearing speckle pattern interferometry method to a certain extent. Appropriate optical parameters and imaging parameters should be selected to ensure the quality of the laser speckle pattern and measurement accuracy.

Digital Speckle Correlation Method and Its Application on Impact Deformation Measurement

Real-time measurement on deformation fields of notched samples under impact tension

High Speed Deformation Measurement Using Digital Speckle Correlation Method

Measurement of Dynamic Three-Dimensional Deformation of Structures Using High-Speed 3-D Digital Image Correlation System

Application of the Speckle Technique for Three-Dimensional Deformation Measurement

The Research of Speckle Technique in Deformation Measurement Fields

Digital Image Correlation Strain Measurement Based on Moving Least-squares Fitting

Dynamic Deformation Measurement Of Specular Surface With Deflectometry And Speckle Digital Image Correlation

3D Digital Speckle Analysis System for Dynamic Strain Measurement in Sheet Deformation

Direct strain measurement method based on the correlation of defocused laser speckle pattern

A New Digital Speckle Correlation Method for Studying the Dynamic Fracture Parameters of Rocks under an Impact Load

Dynamic Deformation Field Measurement System for Rock Failure and Its Application

Simultaneous 3D measurement of deformation and its first derivative with speckle pattern interferometry and shearography

Measurement of deformations for copper/aluminum clad under tension with digital speckle correlation

Digital Speckle Correlation and its Applications

Measurement of Three-Dimensional Deformation Using Speckle Projection Method

Full-field deformation measurement and cracks detection in speckle scene using the deep learning-aided digital image correlation method

Research of Full-Field Deformation Measurement System

Combination of Digital Speckle Pattern Interferometry and Digital Image Correlation for 3-D Deformation Measurement

Vibration Measurement Based on Speckle Projection and Digital Image Correlation Methods

On-Site Dynamic Deformation Measurements Based on Enhanced Temporal Speckle Pattern Interferometry