Abstract:This paper proposes a novel dual-stator brushless doubly-fed machine (DSBDFM) with cage-barrier rotor structure for torque density improvement in application of wind power generation. The torque density of electrical machine mainly relates to machine main dimensions and rotor coupling capability (CC). Therefore, optimizing the DSBDFM, especially the machine power distribution and rotor, affects machine torque density and rotor CC. At first, several rotor topologies are proposed and analyzed to strengthen machine CC. Then, design principles and methods in deciding the main dimensions and power distribution for the developed DSBDFM are analyzed and illustrated in detail. Based on the machine structure and design methods, a 50kW DSBDFM is designed, with outer and inner unit electrical machine power distribution, rotor CC, slot-pole combinations, and non-magnetic ring considered. The design example with detailed design procedure in this study provides designers with a practical method in initial estimation of the dimensions and parameters for the designed DSBDFM. Meanwhile, finite element method (FEM) is used to analyze performances of DSBDFM with winding series connection, which are verified by experimental test. Through the results analysis, it is found that the designed DSBDFM satisfies the requirements with desirable performances, indicating the validity and rationality of design methods.

THE EFFECT OF STRUCTURE AND FREQUENCY CHARACTERISTIC OF DIELECTRIC CONSTANT ON CAPACITANCE OF ELECTRICAL MACHINE STATOR WINDING

Analytical investigation of open-circuit eddy current loss in windings of PM machines

Harmonic Analysis of Airgap Magnetic Fields in Doubly-Fed Flux Reversal Permanent Magnet Machines.

Voltage Distribution Analysis of High Dv/dt Fed Machines Using High Frequency Winding Model

Research of Stator Natural Frequency for Disk Permanent Magnet Machines

Effect of Temperature on Frequency Domain Dielectric Spectroscopy Characteristics of Large Turbine-Generator Stator Insulation

Insulation Design of a High Frequency Electrical Machine for More Electric Aircraft Propulsion

Identification of Laminated Core and Winding's Physical Parameters by Stator's Modal Testings

STUDY ON THE AGING CHARACTERISTICS OF STATOR WINDING INSULATION IN LARGE GENERATOR BASED ON OPERATING HISTORY

Influence of Dimensional Parameters on Three-Phase Short Circuit and Demagnetization in Surface-Mounted PM Machines

Design and Performance Analysis of Dual-Stator Brushless Doubly-Fed Machine with Cage-Barrier Rotor

Online Monitoring of Capacitance and Dissipation Factor of Motor Stator Winding Insulation During Accelerated Life Testing

Analysis of Low Harmonic Windings for High-Speed Permanent Magnet Machines

Analytical Estimation Method of Winding Parasitic Capacitance for High-Frequency High-Voltage Application

Experimental study of the pulse propagation in turbine generator stator windings

Reduction of Switching Frequency Vibration of Induction Machines by Auxiliary Winding with Capacitors

Experimental Study of the Path Characteristics of Partial Discharge Pulses in Generator Stator Windings and in the SSC

The Effect of Bearing Impedance on Online Condition Monitoring for Rotor Winding Insulation of Doubly-Fed Induction Generator

The Effect and Compensation of Phase Angle Deviation along the Winding for the Online Stator Insulation Condition Monitoring

Analysis of Electric Field Stress and Dielectric Loss in Insulation of Magnetic Component for Cascaded Power Electronic Transformer

Design and test of capacitive power transfer coupling for wound field synchronous machines