Abstract:Suspension plasma spray is a promising technology for surface coatings. In this work, a comprehensive numerical model was developed to investigate the multiphase flow of suspension droplets and nanoparticles in direct-current (DC) plasma spraying. A three-dimensional computational model was developed to describe the plasma jet flow fields coupled with the axial injection of suspension droplets in which the zirconia micro- and nanoparticles were dispersed. The suspension droplets were tracked using Lagrangian coordinates, considering particle heating, melting, and evaporation. After evaporation of the solvent surrounding the particle, the nanoparticles were discharged into the plasma flow. In addition to the viscous force exerted by the flow on the micrometer-sized particles, the Brownian force and the Saffman lift force were taken into account. The effects of the noncontinuum on particle momentum transfer and evaporation on heat transfer were also considered. The numerical predictions of gas flow temperature were compared with experimental data and numerical data obtained with a different computational fluid dynamics code. The agreement was reasonable. The trajectories, velocity, and temperature of nanoparticles were calculated, and compared with those of microparticles. The results showed that the Brownian force plays a major role in acceleration and heating of nanoparticles. Compared with the conventional plasma spray process with micrometer-sized feedstock, the nanoparticles in suspension plasma spraying were found to have a wider spatial distribution and higher temperature. The effects of operating parameters, such as the power input to the plasma gas and plasma gas composition, on the gas velocity and temperature were investigated. The parameters that have a significant effect on the heat and momentum transfer to the particles injected in the plasma jet were identified.

Experimental Research on Temperature Field of Plasma Spray Coating

Study on the Thermal Spraying's Surface Repair Technology

On the Heat-Transfer Effect of Spraying Speed During the Plasma Spraying on Turbine Blade

Modeling of Micro- and Nanoparticle Characteristics in DC Suspension Plasma Spray

Low-pressure Plasma Spraying Technology and Its Research Status

Study on Wear Resistance and Spraying Process of Nano-ZrO2 Powder Plasma Spraying Coating

Simulation of Coating Formation During Plasma Spraying

Latest Researches Advances of Plasma Spraying: From Splat to Coating Formation

Modeling of non-Newtonian suspension plasma spraying in an inductively coupled plasma torch

Dynamic Modeling of Micro- and Nano-Sized Particles Impinging on the Substrate During Suspension Plasma Spraying

A Critical Assessment of Particle Temperature Distributions During Plasma Spraying: Numerical Studies for YSZ

Numerical Modeling in Radio Frequency Suspension Plasma Spray of Zirconia Powders

Plasma Spray Process Operating Parameters Optimization Based on Artificial Intelligence

Numerical Studies of Arc Plasma Generation in Single Cathode and Three-Cathode Plasma Torch and Its Impact on Plasma Spraying

Toward the Achievement of Substrate Melting and Controlled Solidification in Thermal Spraying

Effects of Cathode Shape on Plasma Arc and Plasma Jet

Effect of a Spatially Fluctuating Heating of Particles in a Plasma Spray Process

Numerical simulation of three cathode plasma spray torch

Three Dimensional Numerical Analysis of Plasma Spraying Using Supersonic Plasma Gun

Experimental and Numerical Studies of Plasma Forming Process Parameters Effect on Optimum Particle Impact Locations

Effect of Droplet Initial Temperature on Substrate Melting and Its Re-solidification in Plasma Spray Process