Abstract:For the efficient and effective detection in automatic non-destructive testing (NDT) of weld defects, the NDT probe must stay aligned with the welds. It is essential to detect the deviation between the seam and the probe by means of weld recognition, in order to adjust the relative position between the workpiece and the probe. The traditional weld recognition method is suitable for real-time seam tracking when the geometric feature of the groove is distinct; however, it may fail when applied to the formed weld recognition. Other methods proposed by researchers are unsatisfactory in the signal-to-noise ratio of imaging, separation degree of visual features and efficiency of the processing algorithm. To solve these problems, this paper proposes a novel visual weld recognition method using two directional lights. The directional lights are projected onto the edges of the seam to produce the distinct man-made “light and shadow” (LS) features. In this paper, we first study the principles and sensing requirements of the LS features; then a stroboscopic circuit is established to lighten the two directional lights alternatively and meanwhile synchronizes the camera to capture images when each light is on. Afterwards, we propose an image processing algorithm based on thresholding and edge extraction to calculate the accurate edges of the seam. Finally, a weld detection platform is established and experiments on weld recognition and deviation correction are conducted. The experiment results show that the proposed detection method can recognize the edges of the seam effectively in 0.023mm accuracy. The time cost of the image processing algorithm is not more than 13ms. The proposed method is suitable for weld detection where the reinforcements of the seams are as low as 1mm. It expected to be applied to the automatic vision-guided NDT of weld defects.

A LabView-based weld visual recognition

Visual-based research on weld seam initial position recognition in local envieronment

Guiding the welding robot to the initial welding position with visual method

Laser-based Visual Recognition of Multi-Pass Seam in Robot Arc Welding

Recognition of the Initial Position of Weld Based on the Image Pattern Match Technology for Welding Robot

Study on Visual Image Information Detection of External Angle Weld Based on Arc Welding Robot

Recognition for Underwater Welding Seam Based on Laser Vision System

A Weld Joint Type Identification Method for Visual Sensor Based on Image Features and SVM

Visual-based research on the welding robot about recognizing and guiding to the initial welding position

A Feature Matching Algorithm Applied to Welding Trajectory Revising

A vision-based method for narrow weld trajectory recognition of arc welding robots

Method of weld recognition based on textural feature matching

Multiple weld seam laser vision recognition method based on the IPCE algorithm

Acquisition of Weld Seam Dimensional Position Information for Arc Welding Robot Based on Vision Computing.

Weld seam track identification for industrial robot based on illumination correction and center point extraction

A Visual Weld Edge Recognition Method Based on Light and Shadow Feature Construction Using Directional Lighting

Weld Seam Detection Based on Visual Saliency for Autonomous Welding Robots.

Weld feature extraction method based on inter-frame constraint and dynamic template

Welding Seam Recognition Based on Phase Classification

A Machine Vision Approach to Welding Tube Longitudinal Seam Tracking in Real Time

Weld Seam Recognition Based On CCD Image Processing