Abstract:For the efficient and effective detection in automatic non-destructive testing (NDT) of weld defects, the NDT probe must stay aligned with the welds. It is essential to detect the deviation between the seam and the probe by means of weld recognition, in order to adjust the relative position between the workpiece and the probe. The traditional weld recognition method is suitable for real-time seam tracking when the geometric feature of the groove is distinct; however, it may fail when applied to the formed weld recognition. Other methods proposed by researchers are unsatisfactory in the signal-to-noise ratio of imaging, separation degree of visual features and efficiency of the processing algorithm. To solve these problems, this paper proposes a novel visual weld recognition method using two directional lights. The directional lights are projected onto the edges of the seam to produce the distinct man-made “light and shadow” (LS) features. In this paper, we first study the principles and sensing requirements of the LS features; then a stroboscopic circuit is established to lighten the two directional lights alternatively and meanwhile synchronizes the camera to capture images when each light is on. Afterwards, we propose an image processing algorithm based on thresholding and edge extraction to calculate the accurate edges of the seam. Finally, a weld detection platform is established and experiments on weld recognition and deviation correction are conducted. The experiment results show that the proposed detection method can recognize the edges of the seam effectively in 0.023mm accuracy. The time cost of the image processing algorithm is not more than 13ms. The proposed method is suitable for weld detection where the reinforcements of the seams are as low as 1mm. It expected to be applied to the automatic vision-guided NDT of weld defects.

Visual-based research on weld seam initial position recognition in local envieronment

Recognition of the Initial Position of Weld Based on the Image Pattern Match Technology for Welding Robot

Guiding the welding robot to the initial welding position with visual method

Weld Seam Detection Method with Rotational Region Proposal Network.

Method of weld recognition based on textural feature matching

A LabView-based weld visual recognition

Image recognition of the weld initial position in the local environment

Visual-based research on the welding robot about recognizing and guiding to the initial welding position

An image segmentation-based localization method for detecting weld seams

Research on a Visual Weld Detection Method Based on Invariant Moment Features

A 3D Vision-Based Weld Seam Extraction Method for Arbitrarily Placed Spatial Planar Weldments

A Visual Weld Edge Recognition Method Based on Light and Shadow Feature Construction Using Directional Lighting

Weld Seam Recognition Based On CCD Image Processing

Efficient Weld Seam Detection for Robotic Welding Based on Local Image Processing

Real-time detection and localization method for weld seam of narrow butt joint based on semantic segmentation

3D vision-based weld seam extraction method

Auto Identification of Weld Seam’s Initial Position for Visual Servoing Weld Robot

Research on Image Processing of V-type Seam Based on Vision Sensing

Weld Seam Detection Based on Visual Saliency for Autonomous Welding Robots.

Robust identification of weld seam based on region of interest operation