Abstract:The cadmium sulfide (CdS) n-type semiconductor is one of the most used as a window layer in thin-film solar cells, such as CdTe, CIS, CIGS, and CZTS. Optoelectronic properties are the most important characteristics for window materials. CdS thin films obtained using the chemical bath deposition technique (CBD) have been reported; however, large amounts of precursor solutions are used, which generate considerable amounts of toxic waste. The aim of this work is to reduce the amount of precursor solutions used for CdS growth; for this, it is necessary to consider an efficient position for the substrate inside the reactor container and at the same time allow obtaining CdS thin films with adequate physical properties to be applied in the photovoltaic solar cell development. CdS thin films were deposited on soda-lime/SnO2:F substrates (FTO) using the CBD technique; the substrates were placed in three different arrangements [rack system, step system (up), and step system (down)]. CdS samples with areas of 4 cm2 and a thickness of 27-48 nm were obtained; the X-ray diffraction patterns show CdS thin films with different polycrystalline structures. The morphological measurements reveal different surface formations depending on the substrate position, and resistivity values of around 105 Ω*cm were measured. UV-vis spectra show transmittance values of around 45-94% in the visible region with band gap energy values of around 2.1-2.36 eV. The best physical properties of CdS thin films and an efficient CBD process were obtained when the FTO substrates were located near the bottom of the reactor container with the FTO side down, leading to an optimal configuration that allows reducing the amount of precursor solutions and in this way reduces the toxic waste generated. These results are important in the photovoltaic technology process and environmental impact.

STRUCTURAL AND OPTICAL PROPERTIES OF CHEMICAL BATH DEPOSITED CdS THIN FILMS FOR CdS/CdTe SOLAR CELLS

Effects of complexing agent on CdS thin films prepared by chemical bath deposition

CdS THIN FILMS FABRICATED BY CHEMICAL BATH DEPOSITION

Optical Transmission, Photoconductivity, and Morphology of Chemical Bath-Deposited CdS Thin Films for Optoelectronic Applications

An Optimized Multilayer Structure of CdS Layer for CdTe Solar Cells Application

Structural and optical properties of Te doped CdS films

Effect of Substrate and Zn Doping on the Structural, Optical and Electrical Properties of Cds Thin Films Prepared by Cbd Method

Chemical Bath Deposition and Optical Properties of CdS Nanocrystalline Films with Tunable Electronic Band Gap

High-efficiency CdTe-based Thin-Film Solar Cells with Unltrathin CdS:O Window Layer and Processes with Post Annealing

Optical and Electrical Properties of CdS Films

Effect of CdCl2 Annealing Treatment on Thin CdS Films Prepared by Chemical Bath Deposition

Strategy for Performance Enhancement of Cd1-XZnXTe/CdS Core/shell Quantum Dot Sensitized Solar Cells Through Band Adjustment

A Study on the Preparation and Structure of Cadmium Sulfide Nanoparticulate Organized Assembly System

THE PROPERTIES OF CdS THIN FILMS WITH VARIOUS pH BY CHEMICAL BATH DEPOSITION

Synthesis of CdS nanotubes by chemical bath deposition

Electron Beam Evaporated Cadmium Sulphide Thin Films for Solar Cell Applications

Influence of Deposition Time on Structural, Morphological, and Optical Properties of CdS Thin Films Grown by Low-Cost Chemical Bath Deposition

Effect of Bath Temperature on the Properties of CdS Thin Film Deposited by Chemical Bath Deposition

A microstructural study on the surface and interface of CdTe/CdS solar cells

Microstructure and optical properties of CdTe thin films prepared by close spaced sublimation method at various growth temperatures

Comprehensive Analysis of CdS Ultrathin Films Modified by the Substrate Position inside the Reactor Container Using the CBD Technique