A Study of Combustion Technology Featuring the Pulsating Feed of Fuel and the Influence Exerted by Various Parameters

赵海亮,李彦,由长福,徐旭常,金基晟,朴相圭

DOI: https://doi.org/10.3969/j.issn.1001-2060.2004.04.010

2004-01-01

Abstract:A jet-flow diffusion flame based on the adoption of a pulsating fuel-feed combustion mode is investigated. By making use of a direct photographing technique the characteristics and variation mechanism of the flame are observed and analyzed under various operating conditions and parameters. They include: fuel-rich combustion-time share, average Reynolds number and pipe connecting conditions, etc. The impact of various parameters and the flame characteristics under resonant operating conditions are also analyzed. It was found that with the fuel-rich combustion-time share in the range of 70%-90% the flame would assume a more or less regular fuel-rich and fuel-lean alternative structure with a clearer picture being observed during resonant frequencies. At a duty cycle of 70%-80% the flame has a maximum length and the alternative structure assumes a most regular form. At a still lower duty cycle of fuel-rich combustion-time share there e-merged under a resonant frequency a collapsed mixing and turbulent flow at the root of the flame accompanied by a flame lift-off. The lower the resonant frequency is, the stronger the turbulence is. At other frequency values the flame remains attached and has a shorter length with the shortest length appearing at 50% to 60% of duty cycle. The condition of piping connection can also influence the pulsating characteristics of the flame. Under resonant frequencies and with an increase in average Reynolds number the flame may lift off at a relatively high fuel-rich combustion-time share while under other frequencies the flame will remain attached all the time.